Community discussions

MikroTik App
 
poizzon
Member Candidate
Member Candidate
Topic Author
Posts: 113
Joined: Fri Jun 21, 2013 12:53 pm

RBwAPR-2nD&R11e-LTE wAP LTE kit - auto negotiation

Mon Dec 18, 2017 10:58 pm

Hi,

Have trouble with conenction to RBwAPR-2nD via ethernet LAN.

All cables are disconnected, but cable test showing link-ok

if connecting directly to PC, sometimes it comes up 100 fullduples, some time 10 and no data received..

there is logs :

[qwerti@MikroTik] > interface ethernet cable-test ether1
name: ether1
status: link-ok

[qwerti@MikroTik] > interface ethernet monitor ether1
name: ether1
status: link-ok
auto-negotiation: done
rate: 10Mbps
full-duplex: yes
tx-flow-control: no
rx-flow-control: no
advertising: 10M-half,10M-full
link-partner-advertising: 10M-half,10M-full

[qwerti@MikroTik] > interface ethernet print stats
name: ether1
driver-rx-byte: 147 100
driver-rx-packet: 496
driver-tx-byte: 138 168
driver-tx-packet: 404
rx-bytes: 149 084
rx-too-short: 0
rx-64: 7
rx-65-127: 79
rx-128-255: 66
rx-256-511: 315
rx-512-1023: 33
rx-1024-1518: 0
rx-1519-max: 0
rx-too-long: 0
rx-broadcast: 363
rx-pause: 0
rx-multicast: 133
rx-fcs-error: 3
rx-align-error: 1
rx-fragment: 1
rx-overflow: 0
tx-bytes: 139 438
tx-64: 0
tx-65-127: 0
tx-128-255: 0
tx-256-511: 403
tx-512-1023: 0
tx-1024-1518: 0
tx-1519-max: 0
tx-too-long: 0
tx-broadcast: 403
tx-pause: 0
tx-multicast: 0
tx-underrun: 0
tx-collision: 0
tx-collision: 0
tx-excessive-collision: 0
tx-multiple-collision: 0
tx-single-collision: 0
tx-excessive-deferred: 0
tx-deferred: 0
tx-late-collision: 0
[qwerti@MikroTik] >

[qwerti@MikroTik] > system routerboard print
routerboard: yes
board-name: wAP LTE kit
model: RouterBOARD wAP R-2nD
serial-number: xxxxxxxxxxxxxx
firmware-type: qca9531L
factory-firmware: 3.39
current-firmware: 6.41rc65
upgrade-firmware: 6.41rc65
--
poi

Who is online

Users browsing this forum: dad2312, Google [Bot], knowledgemonster, simplextech, sindy and 77 guests