Right now I'm using 3 MikroTik's, which are connected together. Two of them are working as APs, and one is CAPsMAN. In total there is 4 networks,
and every network has it's own Virtual Access Point in CAPsMAN. They are connected to the same bridge - bridge0, then there is VLAN tag on every one of them in Datapaths.
I'm using one bridge to connect everything - Ethernets + CAPs.
I tried to use new VLAN Filtering in bridges, but once I set it up and turn it on, every Ethernet port is working fine, but I'm losing connection on WiFi due to VLAN tag in CAPsMAN
which is impossible to filter in new VLAN Filtering in Bridge(pic #5) because they are dynamic.
Is there any way to do it?