Address overlap... they're all 10.10/16ether 1 - with ip = 10.10.1.1/255.255.0.0 (local) (reply only)
ether 2 - with ip = 10.10.2.1/255.255.0.0 (local)
ether 3 - with ip = 10.10.3.1/255.255.0.0 (local)
Well, if you do not create a bridge, then you'd have to route... but you can't because your network address ranges overlap. Sounds like you're stuck and need to rethink your network design.what i want to is all ether can connect each other without to creat a bridge.....!!!!!