Code: Select all
chain=srcnat action=src-nat to-addresses=x.x.x.x src-address=10.60.0.0/31 log=no log-prefix=""
I am not able to ping this public IP from outside. Traceroute ends at CCR wan port and not reaching to endpoint i.e. 10.60.0.1.
Thanks.
ICMP issue in src-nat
I have following rule configured in MT CCR:
where x.x.x.x is my public IP.
I am not able to ping this public IP from outside. Traceroute ends at CCR wan port and not reaching to endpoint i.e. 10.60.0.1.
Thanks.
I am not able to ping this public IP from outside. Traceroute ends at CCR wan port and not reaching to endpoint i.e. 10.60.0.1.
Thanks.
Re: ICMP issue in src-nat
This is expected, src-nat works for outgoing packets from internal network to outside. To deliver packets from outside to internal network You need dst-nat rule.
Re: ICMP issue in src-nat
Thanks. This worked.