I have an RB912 routerboard with a Mikrotik R11e LTE modem, which once configured will register on mobile network. Winbox interfaces view shows the 'lte1' device (as does /interfaces print), however 'lte1' does not appear as an option for any connection interface (e.g. DHCP Client, bridge, etc...).
Have tried v6.39.3 and 6.40.6, with same result. Am I missing something obvious?
Thanks
-
-
davefussell
just joined
- Posts: 3
- Joined:
Re: MikroTik R11e modem- working, but not available as an interface option
IP address is added automatically and DHCP configuration is moved to - /interface lte apn
-
-
davefussell
just joined
- Posts: 3
- Joined:
Re: MikroTik R11e modem- working, but not available as an interface option
Thank you-
I see the /interface lte apn settings, but am not clear as to why the lte interface doesn't appear alongside the other interfaces (ether1, wlan1 etc) when assigning interface to block (e.g. bridge, DHCP client, etc)
DHCP client shown below as an example
I see the /interface lte apn settings, but am not clear as to why the lte interface doesn't appear alongside the other interfaces (ether1, wlan1 etc) when assigning interface to block (e.g. bridge, DHCP client, etc)
DHCP client shown below as an example
You do not have the required permissions to view the files attached to this post.