Community discussions

MikroTik App
 
User avatar
bajanetworks
just joined
Topic Author
Posts: 4
Joined: Wed Jun 20, 2018 9:51 pm
Location: Baja California, México
Contact:

How to send traffic to the same gateway using a diferent ethernet port?

Fri Jun 22, 2018 3:18 am

Hello guys,
many years ago i did this but now I can not remember how to do it.
What I did before was:

IP > Routes
on the gateway field I put something like this: <IP-Address>~ether2 or <IP-Address>::ether2

Some one knows what is the correct syntax for this? also willing to know how to name this technique.
Thanks
 
Alancoma
just joined
Posts: 2
Joined: Sat Jun 23, 2018 1:32 am

Re: How to send traffic to the same gateway using a diferent ethernet port?  [SOLVED]

Sat Jun 23, 2018 1:34 am

That's easy
Gatewayip%etherX
Last edited by Alancoma on Mon Jun 25, 2018 9:42 am, edited 1 time in total.
 
User avatar
bajanetworks
just joined
Topic Author
Posts: 4
Joined: Wed Jun 20, 2018 9:51 pm
Location: Baja California, México
Contact:

Re: How to send traffic to the same gateway using a diferent ethernet port?

Sun Jun 24, 2018 9:28 pm

haaaa god!! the %
Thank you so much,

you say this is called 'east'? or you meant to say this was easy?
I dont understand you...

how can I find this on the router os documentation?
 
Alancoma
just joined
Posts: 2
Joined: Sat Jun 23, 2018 1:32 am

Re: How to send traffic to the same gateway using a diferent ethernet port?

Sun Jun 24, 2018 11:35 pm

Sorry,
I wanted to say easy.
I found It on internet but I don't remeber where.
 
Sob
Forum Guru
Forum Guru
Posts: 9119
Joined: Mon Apr 20, 2009 9:11 pm

Re: How to send traffic to the same gateway using a diferent ethernet port?

Mon Jun 25, 2018 2:18 am

I didn't find detailed description, but it is mentioned in manual:
gateway (IP | interface | IP%interface | IP@table[, IP | string, [..]]; Default: "")
 
User avatar
bajanetworks
just joined
Topic Author
Posts: 4
Joined: Wed Jun 20, 2018 9:51 pm
Location: Baja California, México
Contact:

Re: How to send traffic to the same gateway using a diferent ethernet port?

Fri Jun 29, 2018 2:58 am

thanks a lot guys,
I didn't find detailed description, but it is mentioned in manual:
gateway (IP | interface | IP%interface | IP@table[, IP | string, [..]]; Default: "")
where in the manual did you found it.
 
User avatar
chechito
Forum Guru
Forum Guru
Posts: 2990
Joined: Sun Aug 24, 2014 3:14 am
Location: Bogota Colombia
Contact:

Re: How to send traffic to the same gateway using a diferent ethernet port?

Fri Jun 29, 2018 3:34 am

thanks a lot guys,
I didn't find detailed description, but it is mentioned in manual:
gateway (IP | interface | IP%interface | IP@table[, IP | string, [..]]; Default: "")
where in the manual did you found it.

https://wiki.mikrotik.com/wiki/Manual:I ... properties

Who is online

Users browsing this forum: JesusUve, xrlls and 92 guests