SXTsq 5 ac very slow pairing

iamwho · Sat Jul 21, 2018 9:34 pm

Hello guys!

I bought two SXTsq 5 ac units a couple of days ago, and for the first time i created a PTP link.
So i configured everything, and for a few days now everything is working alright.
What i am wondering is, is it normal for the link to be established for like 15+ minutes, is there any reason why it happens so slowly?
Is it possible that i misconfigured something, the distance is about 400 meters, the signal strength is very good and the wireless protocol is set to NV2.

Here is the config export of my transmitter:

Code: Select all


# software id = QFAR-GRL4

#

# model = RouterBOARD SXTsq G-5acD

# serial number = 81900861994D

/interface bridge

add name=bridge1

/interface wireless

set [ find default-name=wlan1 ] band=5ghz-a/n/ac channel-width=20/40/80mhz-Ceee country=******* disabled=no frequency=5640 mode=bridge name=wlan2 nv2-preshared-key="********" nv2-security=enabled radio-name=Transmitter ssid=\

    Transmitter wds-default-bridge=bridge1 wds-mode=dynamic wireless-protocol=nv2

/interface wireless security-profiles

set [ find default=yes ] authentication-types=wpa2-psk mode=dynamic-keys supplicant-identity= wpa-pre-shared-key=*********** wpa2-pre-shared-key=**********

/interface bridge port

add bridge=bridge1 hw=no interface=ether1

add bridge=bridge1 interface=wlan2

/ip address

add address=192.168.101.2/24 interface=bridge1 network=192.168.101.0

And here is the receiver:

Code: Select all


# software id = 3LIS-P0WD

#

# model = RouterBOARD SXTsq G-5acD

# serial number = 81900785ECF0

/interface bridge

add fast-forward=no name=bridge1

/interface wireless

set [ find default-name=wlan1 ] band=5ghz-a/n/ac channel-width=20/40/80mhz-Ceee country=*********** disabled=no frequency=5640 mode=station-bridge nv2-preshared-key="**********" nv2-security=enabled ssid=Transmitter wds-default-bridge=\

    bridge1 wds-mode=dynamic wireless-protocol=nv2

/interface wireless security-profiles

set [ find default=yes ] supplicant-identity=

/interface bridge port

add bridge=bridge1 interface=ether1

add bridge=bridge1 interface=wlan1

/ip address

add address=192.168.101.3/24 interface=bridge1 network=192.168.101.0

As i said the connection is flawless and everything works okay, but why when you restart one of the devices it takes so much time for the link to be established again?

Thank you all in advance for the delegated time!

mistry7 · Sat Jul 21, 2018 10:13 pm

There are unfixed issues with new ARM Based devices and NV2
Go with 802.11 until the fix is delivered

InoX · Sun Jul 22, 2018 11:02 pm

It could be Radar Detect.
If you have US version, you are stick with it.
For the rest of the world it can be disabled.

SXTsq 5 ac very slow pairing

SXTsq 5 ac very slow pairing

Re: SXTsq 5 ac very slow pairing

Re: SXTsq 5 ac very slow pairing

Who is online