Community discussions

MUM Europe 2020
 
rado
just joined
Topic Author
Posts: 2
Joined: Sat Jul 28, 2018 1:31 pm

hAP ac + SFP + 100Mb connection

Sat Jul 28, 2018 1:44 pm

Hi guys!
I'm trying to connect my hAP ac to internet provider who gives me 100Mb link. I've tried to use two modules: ATOP APSB53013CXL3 and D-Link DEM-302S-BXD.
My provider doesn't allow me to use auto-negotiation, so I've tried to set auto-negotiation = false and 100Mb. This way I see that link is active (SFP led glows) and I don't get IP address via DHCP. I'm getting same result with both modules.
I've also tried to connect fiber to media converter and then to eth1 port and everything works like a charm. Same with both SFP modules and old D-Link DIR-615 router, so modules are working.
What I'm doing wrong and how can I set up 100Mb connection with hAP ac and SFP module?
 
idlemind
Forum Guru
Forum Guru
Posts: 1108
Joined: Fri Mar 24, 2017 11:15 pm
Location: USA

Re: hAP ac + SFP + 100Mb connection

Mon Jul 30, 2018 10:58 pm

Try keeping the link at the default of 1G ... I'd be surprised to see the fiber SFP allow you to actually drop the speed to 100M. The ISP should be providing your 1G via the SFP and using a shaper to push the connection down to 100M.
 
rado
just joined
Topic Author
Posts: 2
Joined: Sat Jul 28, 2018 1:31 pm

Re: hAP ac + SFP + 100Mb connection

Fri Aug 03, 2018 2:20 pm

provider doesn’t allow me to keep link speed 1Gb - they have 100Mb switch on their side. And one of modules I’m using is 100Mb, not 1Gb
 
wrongt
just joined
Posts: 1
Joined: Fri Nov 29, 2019 8:25 pm

Re: hAP ac + SFP + 100Mb connection

Sat Nov 30, 2019 4:08 pm

Hi Rado, did you solve the issue, i have the same problem with my Hap ac, auto negotiation is turned off, when i set link to 100m or 1g it show that link is up.

Who is online

Users browsing this forum: No registered users and 51 guests