Hello everyone, at the level of my project I had a router Mikrotik that I have to configure it but unfortunately this is my first time that I use it. So, is there anyone who can help me in this level to convert my code from Cisco to Mikrotik?
My configuration is like this:
-------------------------------------------------------------------
interface F0/0
ip address 10.0.0.1 255.255.255.252
ip nat inside
interface F0/1
ip address 172.16.1.1 255.255.255.0
ip nat outside
access-list 1 permit 192.168.1.0 0.0.0.255
ip nat inside source list 1 interface F0/1 overload
ip nat inside source static 192.168.2.1 172.16.1.2
ip route 192.168.1.0 255.255.255.0 10.0.0.2
ip route 192.168.2.0 255.255.255.0 10.0.0.2
ip route 0.0.0.0 0.0.0.0 172.16.1.254
-------------------------------------------------------------------
Thank you.