Community discussions

MikroTik App
 
User avatar
IS0FFD
just joined
Topic Author
Posts: 12
Joined: Thu Dec 29, 2016 10:30 pm
Location: Sassari - Sardinia Island ITA

RB750UP firmware update problem

Fri Oct 05, 2018 5:41 pm

I have updated two RB750UP ros 6.43.2, when I try to update the firmware the RB stops working and needs a full reset.

The current firmware on board in 3.19, I would like to upgrade it to 6.43.2 :)

I tried a search on the forum but I did not find any information.

I add:
at every reboot I have to completely reset... it is not normal!!!

Image
 
Nivalis
just joined
Posts: 3
Joined: Thu Oct 04, 2018 3:30 pm

Re: RB750UP firmware update problem

Wed Oct 17, 2018 12:53 pm

Hello, I have same problem with upgrade firmware on 750UP (i have 30 routers). I try to send this problem in Support with [Ticket#2018100822005227], but they recommend to use NetInstall. It's not working for me. I noticed that after upgrade firmware eth led began fast-fast blinking.
 
User avatar
chechito
Forum Guru
Forum Guru
Posts: 1772
Joined: Sun Aug 24, 2014 3:14 am
Location: Bogota Colombia
Contact:

Re: RB750UP firmware update problem

Sun Oct 21, 2018 5:30 am

same here 2 rb750up

we had to netinstall them with 6.42.9, no more tries with 6.43.xx for a while for us
 
AndresRqta
just joined
Posts: 5
Joined: Sun Oct 21, 2018 4:26 pm

Re: RB750UP firmware update problem

Mon Oct 22, 2018 4:05 am

I have similar problem. but with RB751u-2hnd. this RB is previously hacked with coinhive-virus.
viewtopic.php?f=2&t=140672&p=693661&hilit=virus#p693661
 
Nivalis
just joined
Posts: 3
Joined: Thu Oct 04, 2018 3:30 pm

Re: RB750UP firmware update problem

Mon Nov 26, 2018 10:20 am

I can update 750UP to 6.42.10 firmware with disabled poe and firewall.
 
xicu
just joined
Posts: 21
Joined: Thu Oct 18, 2012 12:29 am

Re: RB750UP firmware update problem

Wed Dec 12, 2018 2:52 pm

We have detected these problem with more than 5 RB750UP. When we try to upgrade firmware then it not starts.

Who is online

Users browsing this forum: Google [Bot], reinerotto and 180 guests