I need your help for sizing of a two networks in the same house.
Uplink1: 300MBit/s download 30MBit/s upload. + LTE for backup, connected over ethernet
One VLAN is used for VoIP, QoS needed, guess a Limiter of the other VLANs should be enough
Probably one IPSec, hardly any traffic
No special firewall rules
Uplink2: 300MBit/s download 30MBit/s upload. + same LTE for backup, connected over Ethernet
At the moment no QoS needed, Probably Limit for each VLAN in future
No Special firewall rules
Of course I could implement everything in on one Routerboard, but for better failsafe i would like to use two Router. (I would configure on both devices all VLANs and if one of them goes down i would switch the uplink between Switch and Router manually)
At the moment I would guess two RB1100AHx4 would be sufficient?
I've also found this thread:
In their sizing 500+ Clients were requested, but only 100mbps, that's why I'm not sure.
The next stronger Router, if I'm right, would be the CCR1009-7G-1C-1S+PC.
I guess two CCR1009 would be enough, however it costs also a lot more.
What do you think, would two RB1100AHx4 be enough?