Community discussions

MikroTik App
 
Emil66
just joined
Topic Author
Posts: 12
Joined: Tue Aug 28, 2018 2:09 am

[Feature Request] DHCP(v4/v6) client: Make arbitrary option codes requestable and provide their values to the script

Fri Nov 02, 2018 12:23 am

Motivation:
The DHCP server in Mikrotik routers can be configured to supply arbitrary options to clients, and the DHCP client in Mikrotik routers can be configured to add arbitrary options too, but the DHCP client has no method of requesting arbitrary options from the server and does not make values from arbitrary options available to the user script. Several IPv6 transition mechanisms rely on DHCP(v4/v6) options to give extended IP configuration information to the clients. This includes two of the most widely used protocols at the moment, 6rd and DS-Lite. Without a way to get this information from the ISP's DHCP server, there is no way to reliably use Mikrotik routers on many ISP connections.

Technical:
RFC 5969 defines 6rd, a protocol based on 6to4. OPTION_6RD (212) for DHCPv4 provides the prefix, mask and length and the addresses of 6rd border relays to the client.
RFC 6333 defines DS-Lite, which uses an IPIPv6 tunnel to a remote CGNAT gateway (called AFTR) in order to move IPv4 through a native IPv6 network. RFC 6334 defines the corresponding OPTION_AFTR_NAME (64) for DHCPv6 to inform the client of the fully qualified domain name of the AFTR.

Request:
Ideally these protocols would be supported directly, but in the meantime they could be scripted, if the DHCP(v4/v6) client could be configured to request arbitrary options and provide the returned values to a script. Please add that functionality to the DHCP clients in RouterOS.
Hex S
 
pospanko
Member Candidate
Member Candidate
Posts: 272
Joined: Sun Dec 18, 2005 4:23 pm

Re: [Feature Request] DHCP(v4/v6) client: Make arbitrary option codes requestable and provide their values to the script

Wed Nov 07, 2018 10:47 pm

+100
Internet, Mikrotik & Network solutions
http://www.pro-ping.hr
 
eduplant
just joined
Posts: 8
Joined: Tue Dec 19, 2017 9:45 am

Re: [Feature Request] DHCP(v4/v6) client: Make arbitrary option codes requestable and provide their values to the script

Sat Nov 17, 2018 9:51 am

+100, again.

Even if the actual mechanisms aren't directly supported, arbitrary DHCP option requests and values would be really handy.
 
bluenobbe
newbie
Posts: 33
Joined: Wed Jan 26, 2005 1:04 pm
Location: Germany

Re: [Feature Request] DHCP(v4/v6) client: Make arbitrary option codes requestable and provide their values to the script

Sun Mar 01, 2020 8:42 pm

When can we expect the feature? Otherwise I have to kick out the mikrotik devices from my network!!!!
It is really poor such reaction for implementation.

Who is online

Users browsing this forum: Baidu [Spider], eworm, inteq, strods and 75 guests