Hi!
I cannot understand what's wrong: 100Mbps client works only on 10Mbps halfduplex on RB951G-2HND firmware ver. 6.34 (or some latest available), router bought 3-4 years ago.
All eth ports working fine with 2 PC which have 1G eth ports (autonegotiation "on", advertise 10/100/1000 Mbps) on any of bridge-ports, all tested cables working fine also.
But when I connect 2 other devices (SmartTV, usb-eth card) with native support only 10/100Mbps it cannot connect to router (ports inactive, dhcp-address cannot be assigned, manual IP is'nt helps).
If I change settings to autonegotiation "off" and manually set mode to 10/100 Mbps then these devices can connect only on 10Mbps halfduplex (manual select), tried "flow control to Off, On or auto" (no difference), reconnecting/reanabling ports did'nt helps.
And in the other case when I use another router with 10/100Mbps ports - these devices can connect successfully.
I don't use any special functions, firewall has no limits for local network (bridge+wlan).
No info in logs.
Anybody can help me?