I am in the process of replacing my CRS226 and well I am stumped with the new firmware 6.43.4.
Currently I have my 226 configured with the old way, and everything is working.
Fundamentally, all I want to do is Trunk sfp-sfplus1, and sfp-sfplus2 ports with vlans 1,10,192,254 Tagged.
Vlan 254 is the management Vlan, with the ip address 192.168.254.3
I want all ports eth* to be untagged on vlan 1 but one. I want port ether22 to be untagged on vlan 254 (management)
Not sure how to ask this, but can someone help me with the config on this Marvell 98DX3236 switch chip.
Everything I have tried is not working. Even just trying to ping the switch from the untagged port.
example config snippet for just pinging the switch with vlans..
add name=Management vlan-filtering=no
add interface=Management name=v_management vlan-id=254
add address=192.168.254.3/24 interface=Management
/interface bridge vlan
add bridge=Management tagged=Management,sfp-sfpplus1 untagged=ether22 vlan-ids=254
/interface bridge set Management vlan-filtering=yes
Thanks in advance!!!