We route our public IP's to clients via destination address so we place a Mikrotik at a client with a route statement to .65 address in the public Pool then the client can use any Public IP

the issue is the latest Mikrotik Stable firmware seems to block all ports except port 80 and 8080 client also complaining of only one way IPSec Traffic

is there a way to disable the firewall? there where no rules in the firewall and was doing this and I added a rule to allow any from the Public and still did not work


Note that we need this device in place to also limit the traffic



Thanks for any help on this!

issue was someone enabled proxy arp and did not tell me added a bunch of odd things