Page 1 of 1

[Help] Failed to access port 80 (WebUI) of wireless router behind Mikrotik

Posted: Wed Dec 12, 2018 8:48 pm
by djtechwork
I can access WebUI my router (station1) from my PC through port 443 (https), but failed to access station2 which is on port 80 (http). What I'm missing..?
Both mikrotik using ROS v.6.4.7
/ip firewall nat
add action=masquerade chain=srcnat out-interface=ether1
add action=dst-nat chain=dstnat dst-address=192.168.77.3 dst-port=512 \
    protocol=tcp to-addresses=192.168.5.12 to-ports=443
add action=dst-nat chain=dstnat dst-address=192.168.77.3 dst-port=513 \
	protocol=tcp to-addresses=192.168.5.13 to-ports=443
add action=dst-nat chain=dstnat dst-address=192.168.77.3 dst-port=514 \
	protocol=tcp to-addresses=192.168.5.14 to-ports=80