Community discussions

MUM Europe 2020
 
kokopelli
just joined
Topic Author
Posts: 18
Joined: Tue Jan 25, 2005 10:33 pm

Queue Tree & Mangle

Sun Mar 04, 2007 3:39 am

How can I allocate bandwidth to specific ethernet interface. I actually have four of them.

Ether 1 - VoIP - Bridged with WAN - public ip (10.0.0.2/29) unlimited bandwidth

Ether 2 - HotSpot - private ip (192.168.20.0/24) - 1024/2048

Ether 3 - LAN - masqueraded - private ip (192.168.30.0/24) - 1024/2048

Ether 4 - WAN - public (10.0.0.1/29)

I tried the trick in the manual but it just wont work.

Thanks
 
User avatar
Equis
Forum Veteran
Forum Veteran
Posts: 888
Joined: Mon Jun 06, 2005 6:48 am

Sun Mar 04, 2007 6:00 am

Hello

Just use simple queue and choose the interface?

I may be missing what you want :-)
 
kokopelli
just joined
Topic Author
Posts: 18
Joined: Tue Jan 25, 2005 10:33 pm

Mon Mar 05, 2007 7:29 pm

Are you suggesting creating a simple queue for each network and then use the WAN as the out interface? But I would also love to have a simple queue for each IP later. Doing this would make me have a complex Simple Queue table.

The solution lies in creating a mangle for each network and then creating a Queue Tree but I just seem to get it right.

Thanks
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6283
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Tue Mar 06, 2007 11:56 am

please refer to this:
http://www.mikrotik.com/testdocs/ros/2.9/root/queue.php

to greatly understand queues in RouterOS and your possibilities

also you have to be a little above novice lvl in networking.

Who is online

Users browsing this forum: tbaschak, vortex and 88 guests