Community discussions

MikroTik App
 
BRMateus2
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 70
Joined: Thu Oct 26, 2017 11:18 pm

PPPoE Encoding is blank even if encryption required

Sat Dec 22, 2018 3:59 am

Hello, I just want to confirm why my PPPoE Client has a blank Encoding even with a Required Encryption profile, and if its possible to solve:
# dec/21/2018 22:50:22 by RouterOS 6.43.7
# model = RouterBOARD 952Ui-5ac2nD
/ppp profile
add name=force-encryption change-tcp-mss=yes use-encryption=required

/interface pppoe-client print
Flags: X - disabled, I - invalid, R - running 
 0  R name="pppoe-out1" mrru=disabled interface=ether1 user="****" password="****" profile=force-encryption keepalive-timeout=10 add-default-route=yes default-route-distance=1 dial-on-demand=no use-peer-dns=yes allow=pap,chap,mschap1,mschap2
 
/interface pppoe-client monitor
numbers: 0
          status: connected
          uptime: 14m29s
    active-links: 1
        encoding: 
    service-name: 
         ac-name: BRAS-3
          ac-mac: ****
             mtu: 1480
             mru: 1480
   local-address: ****
  remote-address: ****

I do not have access to the internet provider equipment or any other router, internet is working fine, Winbox and Telnet does not show the Encoding.
Many thanks for your attention.

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 152 guests