Community discussions

 
brandonlege
just joined
Topic Author
Posts: 4
Joined: Mon Sep 10, 2018 4:49 pm

Public IP Address to Clients

Wed Jan 02, 2019 3:52 pm

All, I'm really getting my rear end whipped trying to accomplish this. I have a ccr1009 that I want to use to assign static public IP addresses to clients. Is there anyone willing to establish a remote session with me via teamviewer to help me out? I have a /27 but can't figure out how to get the public IP all the way to the client router.
 
User avatar
Jotne
Forum Guru
Forum Guru
Posts: 1310
Joined: Sat Dec 24, 2016 11:17 am
Location: jo.overland at gmail.com

Re: Public IP Address to Clients

Wed Jan 02, 2019 4:29 pm

Do you need a full public IP on the inside, or is enough to just map some port from the public IP to the inside host?
 
How to use Splunk to monitor your MikroTik Router

MikroTik->Splunk
 
 
brandonlege
just joined
Topic Author
Posts: 4
Joined: Mon Sep 10, 2018 4:49 pm

Re: Public IP Address to Clients

Wed Jan 02, 2019 4:59 pm

I already tried to just do a 1 for 1 nat and it still didn't get past the nat issue on xbox 1. I think I need the public directly to the customer Router.
 
User avatar
Jotne
Forum Guru
Forum Guru
Posts: 1310
Joined: Sat Dec 24, 2016 11:17 am
Location: jo.overland at gmail.com

Re: Public IP Address to Clients

Wed Jan 02, 2019 6:00 pm

So you problem is to get an xbox to work?

You can make a bridge and add an extra interface to the outside interface. But then the xbox will be on the outside and very open.
 
How to use Splunk to monitor your MikroTik Router

MikroTik->Splunk
 
 
flynno
Member Candidate
Member Candidate
Posts: 241
Joined: Wed Aug 27, 2014 8:11 pm

Re: Public IP Address to Clients

Wed Jan 02, 2019 6:21 pm

Are you using PPPoE or DHCP?
 
brandonlege
just joined
Topic Author
Posts: 4
Joined: Mon Sep 10, 2018 4:49 pm

Re: Public IP Address to Clients

Wed Jan 02, 2019 6:41 pm

DHCP. Don't want anything to do with PPPoE.
 
flynno
Member Candidate
Member Candidate
Posts: 241
Joined: Wed Aug 27, 2014 8:11 pm

Re: Public IP Address to Clients

Wed Jan 02, 2019 7:02 pm

DHCP. Don't want anything to do with PPPoE.
Have you tried assigning the IP via DHCP leases to the MAC of the clients CPE?
 
flynno
Member Candidate
Member Candidate
Posts: 241
Joined: Wed Aug 27, 2014 8:11 pm

Re: Public IP Address to Clients

Wed Jan 02, 2019 7:11 pm

Have you added the nat rule and place it above the current nat rule on your CCR

/ip firewall nat
add action=accept chain=srcnat comment="Client Static IP" src-address=111.111.111.111

111.111.111.111 been the public ip you want to assign to the client

Who is online

Users browsing this forum: No registered users and 68 guests