following is my configuration using RouterOS currently configured as a Switch with a number of VLANs;
# jan/05/1970 13:41:53 by RouterOS 6.43.8
# software id = 6K0L-9RGW
#
# model = CRS326-24G-2S+
# serial number = XXXXXXXXXXXX
/interface bridge
add admin-mac=B8:69:F4:32:CD:68 auto-mac=no comment=defconf name=bridge \
vlan-filtering=yes
/interface bridge port
add bridge=bridge comment=defconf interface=ether1
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=ether3 pvid=10
add bridge=bridge comment=defconf interface=ether4 pvid=10
add bridge=bridge comment=defconf interface=ether5 pvid=10
add bridge=bridge comment=defconf interface=ether6 pvid=10
add bridge=bridge comment=defconf interface=ether7 pvid=10
add bridge=bridge comment=defconf interface=ether8 pvid=10
add bridge=bridge comment=defconf interface=ether9 pvid=10
add bridge=bridge comment=defconf interface=ether10 pvid=10
add bridge=bridge comment=defconf interface=ether11 pvid=20
add bridge=bridge comment=defconf interface=ether12 pvid=20
add bridge=bridge comment=defconf interface=ether13 pvid=20
add bridge=bridge comment=defconf interface=ether14 pvid=30
add bridge=bridge comment=defconf interface=ether15 pvid=30
add bridge=bridge comment=defconf interface=ether16 pvid=40
add bridge=bridge comment=defconf interface=ether17 pvid=40
add bridge=bridge comment=defconf interface=ether18 pvid=40
add bridge=bridge comment=defconf interface=ether19 pvid=40
add bridge=bridge comment=defconf interface=ether20 pvid=50
add bridge=bridge comment=defconf interface=ether21 pvid=50
add bridge=bridge comment=defconf interface=ether22
add bridge=bridge comment=defconf interface=ether23
add bridge=bridge comment=defconf interface=ether24
add bridge=bridge comment=defconf interface=sfp-sfpplus1
add bridge=bridge comment=defconf interface=sfp-sfpplus2
/interface bridge vlan
add bridge=bridge tagged=ether22,ether23,ether24 untagged=\
ether11,ether12,ether13 vlan-ids=20
add bridge=bridge tagged=ether22,ether23,ether24 untagged=ether14,ether15 \
vlan-ids=30
add bridge=bridge tagged=ether22,ether23,ether24 untagged=\
ether16,ether17,ether18,ether19 vlan-ids=40
add bridge=bridge tagged=ether22,ether23,ether24 untagged=ether20,ether21 \
vlan-ids=50
add bridge=bridge tagged=ether24,ether23,ether22 untagged=\
ether3,ether4,ether5,ether6,ether7,ether8,ether9,ether10 vlan-ids=10
/ip address
add address=192.168.10.88/24 comment=defconf interface=bridge network=\
192.168.10.0
/ip service
set telnet disabled=yes
set ftp disabled=yes
set ssh port=xxxxx
set api disabled=yes
set api-ssl disabled=yes
/system identity
set name=haloSW
/system routerboard settings
set boot-os=router-os
[1] I am unable to connect via SSH and [2] I am unable to connect using Winbox.
I want VLAN 10 to be my Management vlan where my PC resides on port ether3 that I use to access the Switch via Winbox and SSH.
Question: What needs to be changed in my configuration that helps to achieve my objective?