Community discussions

MikroTik App
 
sysconfig
just joined
Topic Author
Posts: 7
Joined: Sat Jan 12, 2019 10:14 pm

cannot access HEXv3 (RB750Gr3) after successful Netinstall

Sat Jan 12, 2019 10:39 pm

Hello board,

I need your help. After I've upgraded my HEX from WebUI it cannot be accessed anymore. No problem - using a NetInstall (and following the NetInstall manual _exactly_) I've successfully reimaged the board (the Netinstall UI showed OK). It starts, but cannot be accessed anyway, no IP address connection from my laptop (192.168.88.2/24) to the HEX (should be 192.168.88.1/24 oder 192.168.88.3/24) possible. Using Wireshark I see some low level packets coming from the HEX router, but there are no answers to DHCP queries and the default IP 192.168.88.1 cannot be pinged. If I connect the first interface (Internet) to my home network, it doesn't get an IP address from the home router.

Which options do I still have to get it back to live?
 
ukitnam
just joined
Posts: 19
Joined: Thu Aug 10, 2017 4:56 pm

Re: cannot access HEXv3 (RB750Gr3) after successful Netinstall

Wed Jan 16, 2019 1:03 am

connect thru mac? go to neighbors in winbox.
 
sysconfig
just joined
Topic Author
Posts: 7
Joined: Sat Jan 12, 2019 10:14 pm

Re: cannot access HEXv3 (RB750Gr3) after successful Netinstall  [SOLVED]

Sat Feb 02, 2019 12:38 am

OK, solved: choosing the "apply default config" checkbox in the netinstall UI restored the configuration!

Who is online

Users browsing this forum: Ahrefs [Bot], DanMos79, GoogleOther [Bot], NetTecture, RobertsN, sinisa and 81 guests