The time and date refuses to be set properly

BostjanC · Thu Jan 17, 2019 6:14 pm

I've setup SNTP Client.
What else do I have to do to get current time on the router?

anav · Thu Jan 17, 2019 10:09 pm

I had a similar occurrence with an RB450Gx4 unit a couple of weeks back.
I ended up resetting to defaults, reloading my rules and it worked.

BostjanC · Thu Jan 17, 2019 10:37 pm

I've reset it couple of times so far (holding down the reset button while powering it on).
It didn't help.

anav · Thu Jan 17, 2019 11:47 pm

Okay the one other thing I do differently is use SNTP servers by NAME not IP.

For example since in Canada I use ......
time.nrc.ca
time.chu.nrc.ca

these I add under DNS Server names

AlainCasault · Fri Jan 18, 2019 12:03 am

Have you tried to disable IP CLOUD and set up SYSTEM CLOCK for the correct time zone?

Sent from my cell phone. Sorry for the errors.

MJPoul · Fri Jan 18, 2019 9:27 am

Maybe you should check the time format and time zone? Rather, there is no match.

The time and date refuses to be set properly

The time and date refuses to be set properly

Re: The time and date refuses to be set properly

Re: The time and date refuses to be set properly

Re: The time and date refuses to be set properly

Re: The time and date refuses to be set properly

Re: The time and date refuses to be set properly

Who is online