I have a question regarding pasting a .rsc script on a blank slate router.
Code: Select all
# jan/24/2019 11:07:15 by RouterOS 6.43.8
# software id = T1T5-B008
#
# model = 951G-2HnD
# serial number = 1234567890AB
/interface bridge
add comment="bridge for switch ports (eth2-5 + wlan1)" name=bridge1-DIST
/interface ethernet
set [ find default-name=ether1 ] name=ether1-GTW speed=100Mbps
set [ find default-name=ether2 ] speed=100Mbps
set [ find default-name=ether3 ] speed=100Mbps
set [ find default-name=ether4 ] speed=100Mbps
set [ find default-name=ether5 ] speed=100Mbps
/interface vlan
add interface=ether1-GTW name=vlan1-UFB vlan-id=10
/interface pppoe-client
add add-default-route=yes default-route-distance=0 disabled=no interface=\
vlan1-UFB name=pppoe-out1-aNET password= user=\
a@a.com
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa2-psk comment="" \
eap-methods="" mode=dynamic-keys name=profile1 supplicant-identity=\
MikroTik wpa2-pre-shared-key=
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-Ce \
disabled=no mode=ap-bridge security-profile=profile1 ssid=MikroTik
/ip pool
add name=dhcp_pool0 ranges=192.168.1.100-192.168.1.199
/ip dhcp-server
add address-pool=dhcp_pool0 disabled=no interface=bridge1-DIST lease-time=1h \
name=dhcp1
/interface bridge port
add bridge=bridge1-DIST hw=no interface=ether2
add bridge=bridge1-DIST hw=no interface=ether3
... and so on ...
My question is, was my whole script pasted? I'm planning to use this .rsc for my template, so if I ever need to deploy router to my clients, I can just paste this .rsc to a blank slate router.
Please advise.
Many thanks,
Cheers!