RouterOS 6.43.8
If I create a new bridge with defaults:
Code: Select all
/interface bridge add name=test
Then in WebFig in the bridge port menu, it doesn't show up: only "LAN" is visible. Same problem when I try to assign a DHCP server to it: it's not showing up in the menu that lists all interfaces./interface bridge> print
Flags: X - disabled, R - running
0 R name="LAN" mtu=auto actual-mtu=1500 l2mtu=1588 arp=proxy-arp arp-timeout=auto mac-address=E4:8D:8C:A4:5D:E0 protocol-mode=none fast-forward=yes igmp-snooping=no auto-mac=no admin-mac=E4:8D:8C:A4:5D:E0 ageing-time=5m vlan-filtering=no dhcp-snooping=no
1 R name="test" mtu=auto actual-mtu=1500 l2mtu=65535 arp=enabled arp-timeout=auto mac-address=5E:16:D5:09:C4:26 protocol-mode=rstp fast-forward=yes igmp-snooping=no auto-mac=yes ageing-time=5m priority=0x8000 max-message-age=20s forward-delay=15s transmit-hold-count=6 vlan-filtering=no
dhcp-snooping=no
What's the deal?
PS: The same operation works on hAP AC and hAP AC lite: I can see both bridges in the menu and start assigning ports.