mangle http

adaheem · Mon Mar 26, 2007 3:49 am

dear all

i want to limit p2p and give it a specific amount of bandwidth, and give http higher bandwidth and priority.

i have used this example: http://wiki.mikrotik.com/wiki/TransparentTrafficShaper

but the target is for 10.0.0.12/32 , what i want to do is to give the whole users 512k for http only.
how can i change from the client ip (10.0.0.12/32) as in the example to the whole subnet of mine which is (10.10.10.1/32)

10x

Equis · Mon Mar 26, 2007 7:05 am

10.10.10.0/24 (at a guess if your subnet has 255 hosts)

adaheem · Mon Mar 26, 2007 1:46 pm

no it is not.

any other help plz?

Mon Mar 26, 2007 1:49 pm

you want each user to get a certain limit? you will either have to add one queue for each user, or use PCQ.

if we didn't understand your question properly, please clarify

Equis · Mon Mar 26, 2007 2:48 pm

How many hosts has you subnet?

When I use pcq I do not specifiy a target, just mark connections/packects and put pcq on the whole interface (your side)

That gets every host on cold side of router

adaheem · Mon Mar 26, 2007 11:57 pm

hi

what i want is to give the whole users 768k for http port 80 and 256k for others.

i have 15 users. every one is given a specific bandwith in simple queue with target address to his ip.

each user has 128k down & 24k up.

10x again

mangle http

mangle http

Who is online