Community discussions

MikroTik App
 
jsuter
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 57
Joined: Wed Nov 16, 2005 6:36 am
Location: Grapeland, TX

Hotspot bypass for "client side" IPs

Fri Mar 30, 2007 9:39 am

I have a block of private addresses I would like to completely 'bypass' hotspot mode with. This block is for administrative access of far-end repeater RouterOS boxes, and is firewalled from being able to do anything 'bad' on our network or the internet so I'm not exactly concerned about people 'discovering' the IP block otherwise.

Is there any easy way to get it to bypass an address block?

thanks!
 
User avatar
gustkiller
Member
Member
Posts: 419
Joined: Sat Jan 07, 2006 5:15 am
Location: Brazil
Contact:

Sun Apr 01, 2007 12:50 am

i have same problem here a some /24 blocks that i would like to bypass completely not one by one .. that is a real pain to do!
 
jo2jo
Forum Guru
Forum Guru
Posts: 1003
Joined: Fri May 26, 2006 1:25 am

Sun Apr 01, 2007 7:44 am

this *may* work

go to IP-> hotspot. and then ip bindings: add and type "bypass"

just do /24 and no mac addy..

post if it works..i have other ideas if this does not work
 
pam
just joined
Posts: 2
Joined: Wed May 09, 2007 3:34 pm

Wed May 09, 2007 4:29 pm

Ip-bindings but /24 wont work, just type a range in addres

ex

192.168.0.1-192.168.0.10

That will bypass the auth for 10 ip's

Rregards
 
User avatar
balimore
Forum Veteran
Forum Veteran
Posts: 884
Joined: Mon Apr 10, 2006 3:38 am

Wed May 09, 2007 5:20 pm

---
yes, friend .....
do this from CLI telnet or mac-telnet,
this subnet complete /24
/ip ho ip-bi add address=192.168.0.0/24 type=bypa
this selection 5 addresses only
/ip ho ip-bi add address=192.168.0.11-192.168.0.15 type=bypa
regards
Hasbullah.com
---

Who is online

Users browsing this forum: Ahrefs [Bot], Bing [Bot], gigabyte091 and 91 guests