Community discussions

just joined
Topic Author
Posts: 1
Joined: Wed May 15, 2019 8:42 pm

Port Forward in r11e-lte

Wed May 15, 2019 9:03 pm

Hi everyone,
I need help from someone :-)

I try to open a 88 port for CCTV on IP and followed all in Mikrotik manual but still no access.
all my configurations above:
/ip firewall nat
add chain=dstnat dst-address= dst-port=88 protocol=tcp action=dst-nat to-addresses=
Forum Guru
Forum Guru
Posts: 2948
Joined: Thu Mar 03, 2016 10:23 pm

Re: Port Forward in r11e-lte

Thu May 16, 2019 8:50 am

In the rule it should probably be WAN IP of router in dst-address field, not its LAN IP ...

Where are you connecting from, LAN or WAN? If from LAN, then you should implement hair-pin NAT ... in addition to normal NAT or instead of it, depending on how you want to have it.
Forum Guru
Forum Guru
Posts: 3811
Joined: Mon Dec 04, 2017 9:19 pm

Re: Port Forward in r11e-lte

Thu May 16, 2019 11:55 am

In another words, draw your scenario (a photo of a handmade drawing is sufficient provided that it contains all the details) and export your existing configuration. See hints on anonymisation in my automatic signature.
Instead of writing novels, post /export hide-sensitive. Use find&replace in your favourite text editor to systematically replace all occurrences of each public IP address potentially identifying you by a distinctive pattern such as my.public.ip.1.

Who is online

Users browsing this forum: No registered users and 10 guests