At my company, we just switched from an RB2011 to an RB4011.
The main network is 192.168.124.0/22. Most of the time 126.0/24 IP-s are given with DHCP, for LAN and VPN users as well, but there are a couple devices with fixed IP on 125.0/24 addresses, that are not given dinamically, but fixed, set in the devices.
In case of the previous router, when we connected to VPN, we could ping both 126.0/24 and 125.0/24 IPs, but now, we can't ping them through VPN.
Running IP scan on the router finds all of them, and pinging from the router works.
I transfered the configuration using export, and then cutting up the exported .rsc for part-by-part, and imported them, into the new Router.
RouterOS version of old router was 6.42, the new is 6.43.10.
Ports 2-10 are in the same bridge, all PPP profiles are set to this bridge as well.
Where should I look? I'm sure it must be a network-IP issue, but not sure where to check it.
Thanks for the help in advance!