Community discussions

 
bitwise
newbie
Topic Author
Posts: 35
Joined: Tue Apr 11, 2006 7:22 pm

Link degraded when load applied

Fri May 31, 2019 9:18 am

We have (2) NetMetal 5 with 30db Dish, version 6.44.3 software.
AP Config:
Bridge
5Ghz-A/N/AC
20/40/80Mhz eeeC
5805
Protocol = any
Installation = outdoor

STA Config:
Everything the same except Frequency is set to "auto"

Situation:
Signal TX/RX -59/-60
CCQ TX/RX 74/80
When a load is applied (running bandwidth test) the CCQ will start out good then gradually drop all the way to 5% or worse.

We have tried different channel width and frequencies and protocol, all do the same thing.. Any help would be greatly appreciated.

Who is online

Users browsing this forum: No registered users and 81 guests