Additionally DECIX provides me with the same cable peering in Lisbon through a VLAN.
The DECIX cable, I have it connected to an intermediate CRS switch.
What I do is connect the CRS cable to the CHR with 2 VLANs, one for Lisbon (vlan11) and one for Madrid (vlan10).
The problem is that the CPU of the switch is very high, with only 50.000 PPS the CPU reaches +40%.
This is my configuration. Is something wrong?
Thank you!
Code: Select all
# model = CRS317-1G-16S+
/interface ethernet
set [ find default-name=ether1 ] speed=100Mbps
set [ find default-name=sfp-sfpplus1 ] auto-negotiation=no name=sfp-sfpplus1-DECIX-IN
set [ find default-name=sfp-sfpplus2 ] name=sfp-sfpplus2-DECIX-OUT speed=10Gbps
/interface vlan
add interface=sfp-sfpplus1-DECIX-IN name=vlan-DECIX-Lisbon-IN vlan-id=11
add interface=sfp-sfpplus2-DECIX-OUT name=vlan-DECIX-Lisbon-OUT vlan-id=11
add interface=sfp-sfpplus2-DECIX-OUT name=vlan-DECIX-Madrid-OUT vlan-id=10
/interface bridge
add name=bridge-decix-lisbon protocol-mode=none
add name=bridge-decix-madrid protocol-mode=none
/interface bridge port
add bridge=bridge-decix-madrid interface=sfp-sfpplus1-DECIX-IN
add bridge=bridge-decix-madrid interface=vlan-DECIX-Madrid-OUT
add bridge=bridge-decix-lisbon interface=vlan-DECIX-Lisbon-IN
add bridge=bridge-decix-lisbon interface=vlan-DECIX-Lisbon-OUT
/ip firewall connection tracking
set enabled=no