Dear Mikrotik,
We have a new wAP LTE kit. https://mikrotik.com/product/wap_lte_kit
As stated there "The wAP LTE also has one 10/100 Ethernet LAN port for your wired devices." .. so far so good.
After setting up the sim card, there is internet on the wireless network the device provides, but not on the wired Ethernet LAN port.
Is this on purpose, if yes, why?
I would assume, connecting to the internet with LTE as WAN, and both wireless and ethernet as LAN would work out of the box.
- The WLAN and the LAN devices are on the same network and can communicate with each other, and with the router.
- I can ping a public ip, 8.8.8.8 on a wireless connected device, but not on a device connected on the wire.
Is this a bug in the initial configuration?
If yes, when would be a fix released? What needs to be set so it works as expected?
If no, could there be a Quick Set preset for this simple scenario - as advertised on the product page?
Please advise as soon as possible, I need to get this configuration done ASAP. I have a deadline, and must provide internet on a wire.
Thank you.
[solved] wAP LTE kit, LAN connection
Last edited by LaKing on Sun Jun 09, 2019 8:20 pm, edited 2 times in total.
Re: wAP LTE kit, LAN connection - no internet on LAN on default configuration = bug or feature?
Code: Select all
# jun/08/2019 16:05:33 by RouterOS 6.44.3
# software id = SP23-66TZ
#
# model = RBwAPR-2nD
# serial number = 9CE30956266B
/interface lte
set [ find ] band=3,7,20,31,41 mac-address=00:11:22:33:44:56 name=lte1 network-mode=lte
/interface bridge
add admin-mac=B8:69:F4:B6:26:02 auto-mac=no comment=defconf name=bridge
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-Ce disabled=no distance=indoors frequency=auto mode=ap-bridge ssid=MikroTik-B62603 wireless-protocol=\
802.11
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface lte apn
set [ find default=yes ] apn=net
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/ip pool
add name=dhcp ranges=192.168.88.10-192.168.88.254
/ip dhcp-server
add address-pool=dhcp disabled=no interface=bridge name=defconf
/interface bridge port
add bridge=bridge comment=defconf interface=ether1
add bridge=bridge comment=defconf interface=wlan1
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=lte1 list=WAN
/ip address
add address=192.168.88.1/24 comment=defconf interface=ether1 network=192.168.88.0
/ip dhcp-server network
add address=192.168.88.0/24 comment=defconf gateway=192.168.88.1
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=192.168.88.1 name=router.lan
/ip firewall filter
add action=accept chain=input comment="defconf: accept established,related,untracked" connection-state=established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=invalid
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=drop chain=input comment="defconf: drop all not coming from LAN" in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state=established,related
add action=accept chain=forward comment="defconf: accept established,related, untracked" connection-state=established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" connection-state=invalid
add action=drop chain=forward comment="defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat connection-state=new in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" ipsec-policy=out,none out-interface-list=WAN
/ip ssh
set allow-none-crypto=yes forwarding-enabled=remote
/system clock
set time-zone-name=Europe/Budapest
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LANRe: wAP LTE kit, LAN connection - no internet on LAN on default configuration = bug or feature?
Are you using the dns provided by the sim? try add 8.8.8.8 and 8.8.4.4 as the dns servers
You can remove the LTE dns from the LTE APNs menu untick Use Peer DNS and default route distance to 1
Or in the DHCP add dns servers into the network
You can remove the LTE dns from the LTE APNs menu untick Use Peer DNS and default route distance to 1
Or in the DHCP add dns servers into the network
Re: wAP LTE kit, LAN connection - no internet on LAN on default configuration = bug or feature?
Dear @flynno,
This does not seem to be a DNS issue, as pinging an IP directly over the wire does not resolve...
.. unless I add manually the gateway as route, on my computer.
I checked the DHCP settings, but cound not find any problems yet.
This does not seem to be a DNS issue, as pinging an IP directly over the wire does not resolve...
.. unless I add manually the gateway as route, on my computer.
So it seems that the DHCP server on the wire does not boot up the network connection properly: there is no default route.route add default gw 192.168.88.1 eth0
I checked the DHCP settings, but cound not find any problems yet.
Re: wAP LTE kit, LAN connection
Finallly found the problem. My bad.
I was testing the network connection on two notebooks. Both of these laptops we used previously to set up CAPSMAN based AP's and the setup process required connecting to those devices with a static IP, therefore there was a 192.168.88.11 static IP set on the wired devices on both of those notebooks. ...
Sorry, my mistake. Thank you for your help!
I was testing the network connection on two notebooks. Both of these laptops we used previously to set up CAPSMAN based AP's and the setup process required connecting to those devices with a static IP, therefore there was a 192.168.88.11 static IP set on the wired devices on both of those notebooks. ...
Sorry, my mistake. Thank you for your help!
Re: wAP LTE kit, LAN connection
That's great glad you got it sorted