Community discussions

 
josephillips
just joined
Topic Author
Posts: 7
Joined: Mon May 18, 2009 7:18 pm

Issue mangle in RB4011 or 6.45.1

Mon Jul 15, 2019 11:30 pm

Hi

I recently upgrade my RB2011 to RB4011 and upgraded to version 6.45.1
i have 2 wans setup and failover works perfect
but when im trying to use the second WAN is not working .and was working on RB2011 perfect.

/ip firewall mangle
add action=mark-routing chain=prerouting dst-address=!10.1.0.0/16 new-routing-mark=CO passthrough=no src-address=10.1.1.49

/ip firewall nat
add chain=srcnat action=masquerade src-address=10.1.1.49 dst-address=!10.1.0.0/16 out-interface=WAN2-Ether10

/ip route
;;; CO-RoutingMark
dst-address=0.0.0.0/0 gateway=181.197.xx.xx gateway-status=181.197.xx.xx reachable via WAN-Cableonda-Ether10 distance=1 scope=30 target-scope=10 routing-mark=CO


idk if something change on the new version that breaks this

Any ideas?

Who is online

Users browsing this forum: MSN [Bot] and 90 guests