Community discussions

 
Pericles
just joined
Topic Author
Posts: 8
Joined: Thu May 09, 2019 8:21 pm

Link Failover

Fri Jul 19, 2019 4:30 pm

I am trying to co-configure link failover between the wan ports of rb2011 version 6.40.3. I have 2 ip 41.221.xxx.xxx/30 GW 41.221.xxx.xxx and the second is 41.221.205.121/30 and GW 41.xxx.xxx.xxx. when I physically disconnect one of the interfaces I lose the connection and the second link does not stay up
Last edited by Pericles on Fri Jul 19, 2019 8:01 pm, edited 1 time in total.
 
User avatar
sebastia
Forum Guru
Forum Guru
Posts: 1790
Joined: Tue Oct 12, 2010 3:23 am
Location: Antwerp, BE

Re: Link Failover

Fri Jul 19, 2019 4:56 pm

Hey

Note: don't post your public ip's in clear, at least some masking is advised.

The behaviour you describe is unexpected: one link should not impact the other. But to have better view...

Please post your config: "/export hide-sensitive" (mask consistently your public ip's)
 
Pericles
just joined
Topic Author
Posts: 8
Joined: Thu May 09, 2019 8:21 pm

Re: Link Failover

Fri Jul 19, 2019 6:59 pm

Hi, thanks for the tip

my configuration
Doc1.docx
You do not have the required permissions to view the files attached to this post.
 
User avatar
sebastia
Forum Guru
Forum Guru
Posts: 1790
Joined: Tue Oct 12, 2010 3:23 am
Location: Antwerp, BE

Re: Link Failover

Sat Jul 20, 2019 1:20 am

Try posting the config between [ code ] [/ code ] tags. (without spaces between [])
I tend to not open an unknown docx document from net...
 
Pericles
just joined
Topic Author
Posts: 8
Joined: Thu May 09, 2019 8:21 pm

router hang up whnen i try to access ip firewall

Tue Sep 17, 2019 3:00 pm

why whenever I try to access Mikrotik router in winbox through Mac hangs up whenever I try to access IP Firewall.

Who is online

Users browsing this forum: Majestic-12 [Bot], MSN [Bot] and 137 guests