Page 1 of 1

Link Failover

Posted: Fri Jul 19, 2019 4:30 pm
by Pericles
I am trying to co-configure link failover between the wan ports of rb2011 version 6.40.3. I have 2 ip 41.221.xxx.xxx/30 GW 41.221.xxx.xxx and the second is 41.221.205.121/30 and GW 41.xxx.xxx.xxx. when I physically disconnect one of the interfaces I lose the connection and the second link does not stay up

Re: Link Failover

Posted: Fri Jul 19, 2019 4:56 pm
by sebastia
Hey

Note: don't post your public ip's in clear, at least some masking is advised.

The behaviour you describe is unexpected: one link should not impact the other. But to have better view...

Please post your config: "/export hide-sensitive" (mask consistently your public ip's)

Re: Link Failover

Posted: Fri Jul 19, 2019 6:59 pm
by Pericles
Hi, thanks for the tip

my configuration
Doc1.docx

Re: Link Failover

Posted: Sat Jul 20, 2019 1:20 am
by sebastia
Try posting the config between [ code ] [/ code ] tags. (without spaces between [])
I tend to not open an unknown docx document from net...

router hang up whnen i try to access ip firewall

Posted: Tue Sep 17, 2019 3:00 pm
by Pericles
why whenever I try to access Mikrotik router in winbox through Mac hangs up whenever I try to access IP Firewall.