Hello Experts,
We have a PPPoE server which has a traffic of 950Mb, its a CCR1036, how can we upgrade the ports? what is advisable for Mikrotik? Bonding or is there anything else to use to combine traffic.
Thank you.
-
-
arsalansiddiqui
just joined
- Posts: 23
- Joined:
- Location: Karachi, Pakistan
- Contact:
Re: Increasing traffic
How many pppoe sessions ?
Connection Tracking is on or off ?
CPU load ?
Connection Tracking is on or off ?
CPU load ?
Re: Increasing traffic
check % usage of most loaded CPU core at peak traffic hour to estimate possible remaining processing power
-
-
CZFan
Forum Guru
- Posts: 2098
- Joined:
- Location: South Africa, Krugersdorp (Home town of Brad Binder)
- Contact:
Re: Increasing traffic
I don't think OP asked about utilization of CPU etc, but port speeds.
Depending on which CCR you have, you can change PPPoE to the SFP+ port which will give you 10Gb/s capacity, if you have the SFP only model, that will at least give you 1.25Gb/s for now.
Else I think you need to split traffic from different areas into separate VLAN's/interfaces
Depending on which CCR you have, you can change PPPoE to the SFP+ port which will give you 10Gb/s capacity, if you have the SFP only model, that will at least give you 1.25Gb/s for now.
Else I think you need to split traffic from different areas into separate VLAN's/interfaces
-
-
arsalansiddiqui
just joined
- Posts: 23
- Joined:
- Location: Karachi, Pakistan
- Contact:
Re: Increasing traffic
I ask about cpu utilization because that's how i will suggest preferable method.I don't think OP asked about utilization of CPU etc, but port speeds.
Depending on which CCR you have, you can change PPPoE to the SFP+ port which will give you 10Gb/s capacity, if you have the SFP only model, that will at least give you 1.25Gb/s for now.
Else I think you need to split traffic from different areas into separate VLAN's/interfaces