Community discussions

MikroTik App
 
kolbep
just joined
Topic Author
Posts: 19
Joined: Sat Jun 17, 2017 2:14 am

Fresh Config on 6.45.3 - Hotspot Not Working

Mon Aug 26, 2019 4:43 pm

Good Day
I have upgraded an HAP Lite AP to 6.45.3, and decided to redo the config from scratch.
Started with getting the Basic Admin Network and Wifi working.
Tried the Hotspot Setup, but I am unable to use the hotspot.

Phone and Laptop try to connect to the hotspot. But say Internet is unavailable. They do not bring up the defailt login screen.
Please can somebody check the (basic) config, and give me a hand, before I configure anything Else.

Thanks
[admin@MikroTik] > export
# aug/26/2019 15:34:13 by RouterOS 6.45.3
# software id = W17Q-5CBC
#
# model = RouterBOARD 941-2nD
# serial number = XXXXXXX
/interface bridge
add name=br_AdminNet
add name=br_GuestNet
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa2-psk eap-methods="" management-protection=allowed mode=dynamic-keys name=sp_AdminWifi supplicant-identity="" wpa2-pre-shared-key=XXXXXX
/interface wireless
set [ find default-name=wlan1 ] country="south africa" disabled=no frequency-mode=regulatory-domain mode=ap-bridge name=wl_AdminWifi security-profile=sp_AdminWifi ssid=\
    Senzis
add disabled=no keepalive-frames=disabled mac-address=66:D1:54:42:2C:C7 master-interface=wl_AdminWifi multicast-buffering=disabled name=wl_GuestWifi ssid=\
    "Senzis Customer Wifi" wds-cost-range=0 wds-default-cost=0 wps-mode=disabled
/ip hotspot profile
set [ find default=yes ] login-by=cookie,http-chap,trial
add dns-name=senzis.local hotspot-address=10.5.50.1 login-by=cookie,http-chap,trial name=hsprof1
/ip pool
add name=dhcp_pool0 ranges=10.0.0.20-10.0.0.198
add name=hs-pool-7 ranges=10.5.50.2-10.5.50.254
/ip dhcp-server
add address-pool=dhcp_pool0 disabled=no interface=br_AdminNet name=dhcp1
add address-pool=hs-pool-7 disabled=no interface=br_GuestNet lease-time=1h name=dhcp2
/ip hotspot
add address-pool=hs-pool-7 disabled=no interface=br_GuestNet name=hotspot1 profile=hsprof1
/interface bridge port
add bridge=br_AdminNet interface=ether1
add bridge=br_AdminNet interface=wl_AdminWifi
add bridge=br_GuestNet interface=wl_GuestWifi
/ip address
add address=10.0.0.5/24 interface=br_AdminNet network=10.0.0.0
add address=10.5.50.1/24 comment="hotspot network" interface=br_GuestNet network=10.5.50.0
/ip dhcp-server network
add address=10.0.0.0/24 dns-server=10.0.0.5,10.0.0.2 gateway=10.0.0.2
add address=10.5.50.0/24 comment="hotspot network" gateway=10.5.50.1
/ip dns
set allow-remote-requests=yes servers=10.0.0.2,8.8.8.8
/ip firewall filter
add action=passthrough chain=unused-hs-chain comment="place hotspot rules here" disabled=yes
/ip firewall nat
add action=passthrough chain=unused-hs-chain comment="place hotspot rules here" disabled=yes
add action=masquerade chain=srcnat comment="masquerade hotspot network" src-address=10.5.50.0/24
/ip hotspot user
add name=admin password=admin1
/ip route
 
kolbep
just joined
Topic Author
Posts: 19
Joined: Sat Jun 17, 2017 2:14 am

Re: Fresh Config on 6.45.3 - Hotspot Not Working

Mon Aug 26, 2019 4:47 pm

Verbose Config is
# aug/26/2019 15:46:04 by RouterOS 6.45.3
# software id = W17Q-5CBC
#
# model = RouterBOARD 941-2nD
# serial number = 6616077DB521
/interface bridge
add ageing-time=5m arp=enabled arp-timeout=auto auto-mac=yes dhcp-snooping=no \
    disabled=no fast-forward=yes forward-delay=15s igmp-snooping=no \
    max-message-age=20s mtu=auto name=br_AdminNet priority=0x8000 \
    protocol-mode=rstp transmit-hold-count=6 vlan-filtering=no
add ageing-time=5m arp=enabled arp-timeout=auto auto-mac=yes dhcp-snooping=no \
    disabled=no fast-forward=yes forward-delay=15s igmp-snooping=no \
    max-message-age=20s mtu=auto name=br_GuestNet priority=0x8000 \
    protocol-mode=rstp transmit-hold-count=6 vlan-filtering=no
/interface ethernet
set [ find default-name=ether1 ] advertise=\
    10M-half,10M-full,100M-half,100M-full arp=enabled arp-timeout=auto \
    auto-negotiation=yes bandwidth=unlimited/unlimited disabled=no \
    full-duplex=yes l2mtu=1598 loop-protect=default \
    loop-protect-disable-time=5m loop-protect-send-interval=5s mac-address=\
    64:D1:54:42:2C:C3 mtu=1500 name=ether1 orig-mac-address=64:D1:54:42:2C:C3 \
    rx-flow-control=off speed=100Mbps tx-flow-control=off
set [ find default-name=ether2 ] advertise=\
    10M-half,10M-full,100M-half,100M-full arp=enabled arp-timeout=auto \
    auto-negotiation=yes bandwidth=unlimited/unlimited disabled=no \
    full-duplex=yes l2mtu=1598 loop-protect=default \
    loop-protect-disable-time=5m loop-protect-send-interval=5s mac-address=\
    64:D1:54:42:2C:C4 mtu=1500 name=ether2 orig-mac-address=64:D1:54:42:2C:C4 \
    rx-flow-control=off speed=100Mbps tx-flow-control=off
set [ find default-name=ether3 ] advertise=\
    10M-half,10M-full,100M-half,100M-full arp=enabled arp-timeout=auto \
    auto-negotiation=yes bandwidth=unlimited/unlimited disabled=no \
    full-duplex=yes l2mtu=1598 loop-protect=default \
    loop-protect-disable-time=5m loop-protect-send-interval=5s mac-address=\
    64:D1:54:42:2C:C5 mtu=1500 name=ether3 orig-mac-address=64:D1:54:42:2C:C5 \
    rx-flow-control=off speed=100Mbps tx-flow-control=off
set [ find default-name=ether4 ] advertise=\
    10M-half,10M-full,100M-half,100M-full arp=enabled arp-timeout=auto \
    auto-negotiation=yes bandwidth=unlimited/unlimited disabled=no \
    full-duplex=yes l2mtu=1598 loop-protect=default \
    loop-protect-disable-time=5m loop-protect-send-interval=5s mac-address=\
    64:D1:54:42:2C:C6 mtu=1500 name=ether4 orig-mac-address=64:D1:54:42:2C:C6 \
    rx-flow-control=off speed=100Mbps tx-flow-control=off
/queue interface
set br_AdminNet queue=no-queue
set br_GuestNet queue=no-queue
/interface ethernet switch
set 0 cpu-flow-control=yes mirror-source=none mirror-target=none name=switch1
/interface ethernet switch port
set 0 default-vlan-id=0 vlan-header=leave-as-is vlan-mode=disabled
set 1 default-vlan-id=0 vlan-header=leave-as-is vlan-mode=disabled
set 2 default-vlan-id=0 vlan-header=leave-as-is vlan-mode=disabled
set 3 default-vlan-id=0 vlan-header=leave-as-is vlan-mode=disabled
set 4 default-vlan-id=0 vlan-header=leave-as-is vlan-mode=disabled
/interface list
set [ find name=all ] comment="contains all interfaces" exclude="" include="" \
    name=all
set [ find name=none ] comment="contains no interfaces" exclude="" include="" \
    name=none
set [ find name=dynamic ] comment="contains dynamic interfaces" exclude="" \
    include="" name=dynamic
/interface wireless security-profiles
set [ find default=yes ] authentication-types="" disable-pmkid=no \
    eap-methods=passthrough group-ciphers=aes-ccm group-key-update=5m \
    interim-update=0s management-protection=disabled mode=none \
    mschapv2-username="" name=default radius-called-format=mac:ssid \
    radius-eap-accounting=no radius-mac-accounting=no \
    radius-mac-authentication=no radius-mac-caching=disabled \
    radius-mac-format=XX:XX:XX:XX:XX:XX radius-mac-mode=as-username \
    static-algo-0=none static-algo-1=none static-algo-2=none static-algo-3=\
    none static-sta-private-algo=none static-transmit-key=key-0 \
    supplicant-identity=MikroTik tls-certificate=none tls-mode=\
    no-certificates unicast-ciphers=aes-ccm
add authentication-types=wpa2-psk disable-pmkid=no eap-methods="" \
    group-ciphers=aes-ccm group-key-update=5m interim-update=0s \
    management-protection=allowed mode=dynamic-keys mschapv2-username="" \
    name=sp_AdminWifi radius-called-format=mac:ssid radius-eap-accounting=no \
    radius-mac-accounting=no radius-mac-authentication=no radius-mac-caching=\
    disabled radius-mac-format=XX:XX:XX:XX:XX:XX radius-mac-mode=as-username \
    static-algo-0=none static-algo-1=none static-algo-2=none static-algo-3=\
    none static-sta-private-algo=none static-transmit-key=key-0 \
    supplicant-identity="" tls-certificate=none tls-mode=no-certificates \
    unicast-ciphers=aes-ccm
/interface wireless
set [ find default-name=wlan1 ] adaptive-noise-immunity=none allow-sharedkey=\
    no ampdu-priorities=0 amsdu-limit=8192 amsdu-threshold=8192 antenna-gain=\
    0 area="" arp=enabled arp-timeout=auto band=2ghz-b/g basic-rates-a/g=\
    6Mbps basic-rates-b=1Mbps bridge-mode=enabled channel-width=20mhz \
    compression=no country="south africa" default-ap-tx-limit=0 \
    default-authentication=yes default-client-tx-limit=0 default-forwarding=\
    yes disable-running-check=no disabled=no disconnect-timeout=3s distance=\
    dynamic frame-lifetime=0 frequency=2412 frequency-mode=regulatory-domain \
    frequency-offset=0 guard-interval=any hide-ssid=no ht-basic-mcs=\
    mcs-0,mcs-1,mcs-2,mcs-3,mcs-4,mcs-5,mcs-6,mcs-7 ht-supported-mcs="mcs-0,mc\
    s-1,mcs-2,mcs-3,mcs-4,mcs-5,mcs-6,mcs-7,mcs-8,mcs-9,mcs-10,mcs-11,mcs-12,m\
    cs-13,mcs-14,mcs-15,mcs-16,mcs-17,mcs-18,mcs-19,mcs-20,mcs-21,mcs-22,mcs-2\
    3" hw-fragmentation-threshold=disabled hw-protection-mode=none \
    hw-protection-threshold=0 hw-retries=7 installation=any \
    interworking-profile=disabled keepalive-frames=enabled l2mtu=1600 \
    mac-address=64:D1:54:42:2C:C7 max-station-count=2007 mode=ap-bridge mtu=\
    1500 multicast-buffering=enabled multicast-helper=default name=\
    wl_AdminWifi noise-floor-threshold=default nv2-cell-radius=30 \
    nv2-downlink-ratio=50 nv2-mode=dynamic-downlink nv2-noise-floor-offset=\
    default nv2-qos=default nv2-queue-count=2 nv2-security=disabled \
    nv2-sync-secret="" on-fail-retry-time=100ms preamble-mode=both \
    radio-name=64D154422CC7 rate-selection=advanced rate-set=default \
    rx-chains=0,1 scan-list=default secondary-channel="" security-profile=\
    sp_AdminWifi ssid=Senzis station-bridge-clone-mac=00:00:00:00:00:00 \
    station-roaming=enabled supported-rates-a/g=\
    6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps supported-rates-b=\
    1Mbps,2Mbps,5.5Mbps,11Mbps tdma-period-size=2 tx-chains=0,1 \
    tx-power-mode=default update-stats-interval=disabled vlan-id=1 vlan-mode=\
    no-tag wds-cost-range=50-150 wds-default-bridge=none wds-default-cost=100 \
    wds-ignore-ssid=no wds-mode=disabled wireless-protocol=any wmm-support=\
    disabled wps-mode=push-button
add area="" arp=enabled arp-timeout=auto bridge-mode=enabled \
    default-ap-tx-limit=0 default-authentication=yes default-client-tx-limit=\
    0 default-forwarding=yes disable-running-check=no disabled=no hide-ssid=\
    no interworking-profile=disabled keepalive-frames=disabled l2mtu=1600 \
    mac-address=66:D1:54:42:2C:C7 master-interface=wl_AdminWifi \
    max-station-count=2007 mode=ap-bridge mtu=1500 multicast-buffering=\
    disabled multicast-helper=default name=wl_GuestWifi security-profile=\
    default ssid="Senzis Customer Wifi" station-bridge-clone-mac=\
    00:00:00:00:00:00 station-roaming=enabled update-stats-interval=disabled \
    vlan-id=1 vlan-mode=no-tag wds-cost-range=0 wds-default-bridge=none \
    wds-default-cost=0 wds-ignore-ssid=no wds-mode=disabled wmm-support=\
    disabled wps-mode=disabled
/interface wireless manual-tx-power-table
set wl_AdminWifi manual-tx-powers="1Mbps:17,2Mbps:17,5.5Mbps:17,11Mbps:17,6Mbp\
    s:17,9Mbps:17,12Mbps:17,18Mbps:17,24Mbps:17,36Mbps:17,48Mbps:17,54Mbps:17,\
    HT20-0:17,HT20-1:17,HT20-2:17,HT20-3:17,HT20-4:17,HT20-5:17,HT20-6:17,HT20\
    -7:17,HT40-0:17,HT40-1:17,HT40-2:17,HT40-3:17,HT40-4:17,HT40-5:17,HT40-6:1\
    7,HT40-7:17"
/interface wireless nstreme
set wl_AdminWifi disable-csma=no enable-nstreme=no enable-polling=yes \
    framer-limit=3200 framer-policy=none
/ip dhcp-client option
set clientid_duid code=61 name=clientid_duid value="0xff\$(CLIENT_DUID)"
set clientid code=61 name=clientid value="0x01\$(CLIENT_MAC)"
set hostname code=12 name=hostname value="\$(HOSTNAME)"
/ip hotspot user profile
set [ find default=yes ] add-mac-cookie=yes address-list="" idle-timeout=none \
    !insert-queue-before keepalive-timeout=2m mac-cookie-timeout=3d name=\
    default !parent-queue !queue-type shared-users=1 status-autorefresh=1m \
    transparent-proxy=no
/ip hotspot profile
set [ find default=yes ] dns-name="" hotspot-address=0.0.0.0 html-directory=\
    hotspot html-directory-override="" http-cookie-lifetime=3d http-proxy=\
    0.0.0.0:0 login-by=cookie,http-chap,trial name=default rate-limit="" \
    smtp-server=0.0.0.0 split-user-domain=no trial-uptime-limit=30m \
    trial-uptime-reset=1d trial-user-profile=default use-radius=no
add dns-name=senzis.local hotspot-address=10.5.50.1 html-directory=hotspot \
    html-directory-override="" http-cookie-lifetime=3d http-proxy=0.0.0.0:0 \
    login-by=cookie,http-chap,trial name=hsprof1 rate-limit="" smtp-server=\
    0.0.0.0 split-user-domain=no trial-uptime-limit=30m trial-uptime-reset=1d \
    trial-user-profile=default use-radius=no
/ip ipsec mode-config
set [ find default=yes ] name=request-only responder=no
/ip ipsec policy group
set [ find default=yes ] name=default
/ip ipsec profile
set [ find default=yes ] dh-group=modp2048,modp1024 dpd-interval=2m \
    dpd-maximum-failures=5 enc-algorithm=aes-128,3des hash-algorithm=sha1 \
    lifetime=1d name=default nat-traversal=yes proposal-check=obey
/ip ipsec proposal
set [ find default=yes ] auth-algorithms=sha1 disabled=no enc-algorithms=\
    aes-256-cbc,aes-192-cbc,aes-128-cbc lifetime=30m name=default pfs-group=\
    modp1024
/ip pool
add name=dhcp_pool0 ranges=10.0.0.20-10.0.0.198
add name=hs-pool-7 ranges=10.5.50.2-10.5.50.254
/ip dhcp-server
add address-pool=dhcp_pool0 authoritative=yes bootp-support=static disabled=\
    no interface=br_AdminNet lease-script="" lease-time=10m name=dhcp1 \
    use-radius=no
add address-pool=hs-pool-7 authoritative=yes bootp-support=static disabled=no \
    interface=br_GuestNet lease-script="" lease-time=1h name=dhcp2 \
    use-radius=no
/ip hotspot
add address-pool=hs-pool-7 addresses-per-mac=2 disabled=no idle-timeout=5m \
    interface=br_GuestNet keepalive-timeout=none login-timeout=none name=\
    hotspot1 profile=hsprof1
/ppp profile
set *0 address-list="" !bridge !bridge-horizon !bridge-path-cost \
    !bridge-port-priority change-tcp-mss=yes !dns-server !idle-timeout \
    !incoming-filter !insert-queue-before !interface-list !local-address \
    name=default on-down="" on-up="" only-one=default !outgoing-filter \
    !parent-queue !queue-type !rate-limit !remote-address !session-timeout \
    use-compression=default use-encryption=default use-mpls=default use-upnp=\
    default !wins-server
set *FFFFFFFE address-list="" !bridge !bridge-horizon !bridge-path-cost \
    !bridge-port-priority change-tcp-mss=yes !dns-server !idle-timeout \
    !incoming-filter !insert-queue-before !interface-list !local-address \
    name=default-encryption on-down="" on-up="" only-one=default \
    !outgoing-filter !parent-queue !queue-type !rate-limit !remote-address \
    !session-timeout use-compression=default use-encryption=yes use-mpls=\
    default use-upnp=default !wins-server
/interface pptp-client
add add-default-route=no allow=pap,chap,mschap1,mschap2 connect-to=\
    kolbep.ddns.net dial-on-demand=no disabled=no keepalive-timeout=60 \
    max-mru=1450 max-mtu=1450 mrru=disabled name=kolbep.ddns.net profile=\
    default-encryption user=senzi1
/queue interface
set kolbep.ddns.net queue=no-queue
/queue type
set 0 kind=pfifo name=default pfifo-limit=50
set 1 kind=pfifo name=ethernet-default pfifo-limit=50
set 2 kind=sfq name=wireless-default sfq-allot=1514 sfq-perturb=5
set 3 kind=red name=synchronous-default red-avg-packet=1000 red-burst=20 \
    red-limit=60 red-max-threshold=50 red-min-threshold=10
set 4 kind=sfq name=hotspot-default sfq-allot=1514 sfq-perturb=5
set 5 kind=pcq name=pcq-upload-default pcq-burst-rate=0 pcq-burst-threshold=0 \
    pcq-burst-time=10s pcq-classifier=src-address pcq-dst-address-mask=32 \
    pcq-dst-address6-mask=128 pcq-limit=50KiB pcq-rate=0 \
    pcq-src-address-mask=32 pcq-src-address6-mask=128 pcq-total-limit=2000KiB
set 6 kind=pcq name=pcq-download-default pcq-burst-rate=0 \
    pcq-burst-threshold=0 pcq-burst-time=10s pcq-classifier=dst-address \
    pcq-dst-address-mask=32 pcq-dst-address6-mask=128 pcq-limit=50KiB \
    pcq-rate=0 pcq-src-address-mask=32 pcq-src-address6-mask=128 \
    pcq-total-limit=2000KiB
set 7 kind=none name=only-hardware-queue
set 8 kind=mq-pfifo mq-pfifo-limit=50 name=multi-queue-ethernet-default
set 9 kind=pfifo name=default-small pfifo-limit=10
/queue interface
set ether1 queue=only-hardware-queue
set ether2 queue=only-hardware-queue
set ether3 queue=only-hardware-queue
set ether4 queue=only-hardware-queue
set wl_AdminWifi queue=wireless-default
set wl_GuestWifi queue=wireless-default
/routing bgp instance
set default as=65530 client-to-client-reflection=yes !cluster-id \
    !confederation disabled=no ignore-as-path-len=no name=default out-filter=\
    "" redistribute-connected=no redistribute-ospf=no redistribute-other-bgp=\
    no redistribute-rip=no redistribute-static=no router-id=0.0.0.0 \
    routing-table=""
/routing ospf instance
set [ find default=yes ] disabled=no distribute-default=never !domain-id \
    !domain-tag in-filter=ospf-in metric-bgp=auto metric-connected=20 \
    metric-default=1 metric-other-ospf=auto metric-rip=20 metric-static=20 \
    !mpls-te-area !mpls-te-router-id name=default out-filter=ospf-out \
    redistribute-bgp=no redistribute-connected=no redistribute-other-ospf=no \
    redistribute-rip=no redistribute-static=no router-id=0.0.0.0 \
    !routing-table !use-dn
/routing ospf area
set [ find default=yes ] area-id=0.0.0.0 disabled=no instance=default name=\
    backbone type=default
/snmp community
set [ find default=yes ] addresses=::/0 authentication-protocol=MD5 \
    encryption-protocol=DES name=public read-access=yes security=none \
    write-access=no
/system logging action
set 0 memory-lines=1000 memory-stop-on-full=no name=memory target=memory
set 1 disk-file-count=2 disk-file-name=log disk-lines-per-file=1000 \
    disk-stop-on-full=no name=disk target=disk
set 2 name=echo remember=yes target=echo
set 3 bsd-syslog=no name=remote remote=0.0.0.0 remote-port=514 src-address=\
    0.0.0.0 syslog-facility=daemon syslog-severity=auto syslog-time-format=\
    bsd-syslog target=remote
/user group
set read name=read policy="local,telnet,ssh,reboot,read,test,winbox,password,w\
    eb,sniff,sensitive,api,romon,tikapp,!ftp,!write,!policy,!dude" skin=\
    default
set write name=write policy="local,telnet,ssh,reboot,read,write,test,winbox,pa\
    ssword,web,sniff,sensitive,api,romon,tikapp,!ftp,!policy,!dude" skin=\
    default
set full name=full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,\
    winbox,password,web,sniff,sensitive,api,romon,dude,tikapp" skin=default
/caps-man aaa
set called-format=mac:ssid interim-update=disabled mac-caching=disabled \
    mac-format=XX:XX:XX:XX:XX:XX mac-mode=as-username
/caps-man manager
set ca-certificate=none certificate=none enabled=no package-path="" \
    require-peer-certificate=no upgrade-policy=none
/caps-man manager interface
set [ find default=yes ] disabled=no forbid=no interface=all
/certificate settings
set crl-download=yes crl-store=ram crl-use=yes
/interface bridge port
add auto-isolate=no bpdu-guard=no bridge=br_AdminNet broadcast-flood=yes \
    disabled=no edge=auto fast-leave=no frame-types=admit-all horizon=none \
    hw=yes ingress-filtering=no interface=ether1 internal-path-cost=10 learn=\
    auto multicast-router=temporary-query path-cost=10 point-to-point=auto \
    priority=0x80 pvid=1 restricted-role=no restricted-tcn=no tag-stacking=no \
    trusted=no unknown-multicast-flood=yes unknown-unicast-flood=yes
add auto-isolate=no bpdu-guard=no bridge=br_AdminNet broadcast-flood=yes \
    disabled=no edge=auto fast-leave=no frame-types=admit-all horizon=none \
    ingress-filtering=no interface=wl_AdminWifi internal-path-cost=10 learn=\
    auto multicast-router=temporary-query path-cost=10 point-to-point=auto \
    priority=0x80 pvid=1 restricted-role=no restricted-tcn=no tag-stacking=no \
    trusted=no unknown-multicast-flood=yes unknown-unicast-flood=yes
add auto-isolate=no bpdu-guard=no bridge=br_GuestNet broadcast-flood=yes \
    disabled=no edge=auto fast-leave=no frame-types=admit-all horizon=none \
    ingress-filtering=no interface=wl_GuestWifi internal-path-cost=10 learn=\
    auto multicast-router=temporary-query path-cost=10 point-to-point=auto \
    priority=0x80 pvid=1 restricted-role=no restricted-tcn=no tag-stacking=no \
    trusted=no unknown-multicast-flood=yes unknown-unicast-flood=yes
/interface bridge settings
set allow-fast-path=yes use-ip-firewall=no use-ip-firewall-for-pppoe=no \
    use-ip-firewall-for-vlan=no
/ip firewall connection tracking
set enabled=auto generic-timeout=10m icmp-timeout=10s loose-tcp-tracking=yes \
    tcp-close-timeout=10s tcp-close-wait-timeout=10s tcp-established-timeout=\
    1d tcp-fin-wait-timeout=10s tcp-last-ack-timeout=10s \
    tcp-max-retrans-timeout=5m tcp-syn-received-timeout=5s \
    tcp-syn-sent-timeout=5s tcp-time-wait-timeout=10s tcp-unacked-timeout=5m \
    udp-stream-timeout=3m udp-timeout=10s
/ip neighbor discovery-settings
set discover-interface-list=!dynamic
/ip settings
set accept-redirects=no accept-source-route=no allow-fast-path=yes \
    arp-timeout=30s icmp-rate-limit=10 icmp-rate-mask=0x1818 ip-forward=yes \
    max-neighbor-entries=8192 route-cache=yes rp-filter=no secure-redirects=\
    yes send-redirects=yes tcp-syncookies=no
/interface detect-internet
set detect-interface-list=none internet-interface-list=none \
    lan-interface-list=none wan-interface-list=none
/interface l2tp-server server
set allow-fast-path=no authentication=pap,chap,mschap1,mschap2 \
    caller-id-type=ip-address default-profile=default-encryption enabled=no \
    keepalive-timeout=30 max-mru=1450 max-mtu=1450 max-sessions=unlimited \
    mrru=disabled one-session-per-host=no use-ipsec=no
/interface ovpn-server server
set auth=sha1,md5 cipher=blowfish128,aes128 default-profile=default enabled=\
    no keepalive-timeout=60 mac-address=FE:1F:00:41:0F:3E max-mtu=1500 mode=\
    ip netmask=24 port=1194 require-client-certificate=no
/interface pptp-server server
set authentication=mschap1,mschap2 default-profile=default-encryption \
    enabled=no keepalive-timeout=30 max-mru=1450 max-mtu=1450 mrru=disabled
/interface sstp-server server
set authentication=pap,chap,mschap1,mschap2 certificate=none default-profile=\
    default enabled=no force-aes=no keepalive-timeout=60 max-mru=1500 \
    max-mtu=1500 mrru=disabled pfs=no port=443 tls-version=any \
    verify-client-certificate=no
/interface wireless align
set active-mode=yes audio-max=-20 audio-min=-100 audio-monitor=\
    00:00:00:00:00:00 filter-mac=00:00:00:00:00:00 frame-size=300 \
    frames-per-second=25 receive-all=no ssid-all=no
/interface wireless cap
set bridge=none caps-man-addresses="" caps-man-certificate-common-names="" \
    caps-man-names="" certificate=none discovery-interfaces="" enabled=no \
    interfaces="" lock-to-caps-man=no static-virtual=no
/interface wireless sniffer
set channel-time=200ms file-limit=10 file-name="" memory-limit=10 \
    multiple-channels=no only-headers=no receive-errors=no streaming-enabled=\
    no streaming-max-rate=0 streaming-server=0.0.0.0
/interface wireless snooper
set channel-time=200ms multiple-channels=yes receive-errors=no
/ip accounting
set account-local-traffic=no enabled=no threshold=256
/ip accounting web-access
set accessible-via-web=no address=0.0.0.0/0
/ip address
add address=10.0.0.5/24 disabled=no interface=br_AdminNet network=10.0.0.0
add address=10.5.50.1/24 comment="hotspot network" disabled=no interface=\
    br_GuestNet network=10.5.50.0
/ip cloud
set ddns-enabled=no ddns-update-interval=none update-time=yes
/ip cloud advanced
set use-local-address=no
/ip dhcp-server config
set accounting=yes interim-update=0s store-leases-disk=5m
/ip dhcp-server network
add address=10.0.0.0/24 caps-manager="" dhcp-option="" dns-server=\
    10.0.0.5,10.0.0.2 gateway=10.0.0.2 ntp-server="" wins-server=""
add address=10.5.50.0/24 caps-manager="" comment="hotspot network" \
    dhcp-option="" dns-server="" gateway=10.5.50.1 ntp-server="" wins-server=\
    ""
/ip dns
set allow-remote-requests=yes cache-max-ttl=1w cache-size=2048KiB \
    max-concurrent-queries=100 max-concurrent-tcp-sessions=20 \
    max-udp-packet-size=4096 query-server-timeout=2s query-total-timeout=10s \
    servers=10.0.0.2,8.8.8.8
/ip firewall filter
add action=passthrough chain=unused-hs-chain comment=\
    "place hotspot rules here" disabled=yes
/ip firewall nat
add action=passthrough chain=unused-hs-chain comment=\
    "place hotspot rules here" disabled=yes !to-addresses !to-ports
add action=masquerade chain=srcnat comment="masquerade hotspot network" \
    src-address=10.5.50.0/24 !to-addresses !to-ports
/ip firewall service-port
set ftp disabled=no ports=21
set tftp disabled=no ports=69
set irc disabled=no ports=6667
set h323 disabled=no
set sip disabled=no ports=5060,5061 sip-direct-media=yes sip-timeout=1h
set pptp disabled=no
set udplite disabled=no
set dccp disabled=no
set sctp disabled=no
/ip hotspot service-port
set ftp disabled=no ports=21
/ip hotspot user
set [ find default=yes ] comment="counters and limits for trial users" \
    disabled=no name=default-trial
add disabled=no name=admin profile=default
/ip ipsec policy
set 0 disabled=no dst-address=::/0 group=default proposal=default protocol=\
    all src-address=::/0 template=yes
/ip ipsec settings
set accounting=yes interim-update=0s xauth-use-radius=no
/ip proxy
set always-from-cache=no anonymous=no cache-administrator=webmaster \
    cache-hit-dscp=4 cache-on-disk=no cache-path=web-proxy enabled=no \
    max-cache-object-size=2048KiB max-cache-size=unlimited \
    max-client-connections=600 max-fresh-time=3d max-server-connections=600 \
    parent-proxy=:: parent-proxy-port=0 port=8080 serialize-connections=no \
    src-address=::
/ip route
add !bgp-as-path !bgp-atomic-aggregate !bgp-communities !bgp-local-pref \
    !bgp-med !bgp-origin !bgp-prepend !check-gateway disabled=no distance=1 \
    dst-address=0.0.0.0/0 gateway=10.0.0.2 !route-tag !routing-mark scope=30 \
    target-scope=10
/ip service
set telnet address="" disabled=no port=23
set ftp address="" disabled=no port=21
set www address="" disabled=no port=80
set ssh address="" disabled=no port=22
set www-ssl address="" certificate=none disabled=yes port=443
set api address="" disabled=no port=8728
set winbox address="" disabled=no port=8291
set api-ssl address="" certificate=none disabled=no port=8729
/ip socks
set connection-idle-timeout=2m enabled=no max-connections=200 port=1080
/ip ssh
set allow-none-crypto=no always-allow-password-login=no forwarding-enabled=no \
    host-key-size=2048 strong-crypto=no
/ip tftp settings
set max-block-size=4096
/ip traffic-flow
set active-flow-timeout=30m cache-entries=8k enabled=no \
    inactive-flow-timeout=15s interfaces=all
/ip traffic-flow ipfix
set bytes=yes dst-address=yes dst-address-mask=yes dst-mac-address=yes \
    dst-port=yes first-forwarded=yes gateway=yes icmp-code=yes icmp-type=yes \
    igmp-type=yes in-interface=yes ip-header-length=yes ip-total-length=yes \
    ipv6-flow-label=yes is-multicast=yes last-forwarded=yes nat-dst-address=\
    yes nat-dst-port=yes nat-src-address=yes nat-src-port=yes out-interface=\
    yes packets=yes protocol=yes src-address=yes src-address-mask=yes \
    src-mac-address=yes src-port=yes tcp-ack-num=yes tcp-flags=yes \
    tcp-seq-num=yes tcp-window-size=yes tos=yes ttl=yes udp-length=yes
/ip upnp
set allow-disable-external-interface=no enabled=no show-dummy-rule=yes
/mpls
set dynamic-label-range=16-1048575 propagate-ttl=yes
/mpls interface
set [ find default=yes ] disabled=no interface=all mpls-mtu=1508
/mpls ldp
set distribute-for-default-route=no enabled=no hop-limit=255 loop-detect=no \
    lsr-id=0.0.0.0 path-vector-limit=255 transport-address=0.0.0.0 \
    use-explicit-null=no
/port firmware
set directory=firmware ignore-directip-modem=no
/ppp aaa
set accounting=yes interim-update=0s use-circuit-id-in-nas-port-id=no \
    use-radius=no
/radius incoming
set accept=no port=3799
/routing bfd interface
set [ find default=yes ] disabled=no interface=all interval=0.2s min-rx=0.2s \
    multiplier=5
/routing mme
set bidirectional-timeout=2 gateway-class=none gateway-keepalive=1m \
    gateway-selection=no-gateway origination-interval=5s preferred-gateway=\
    0.0.0.0 timeout=1m ttl=50
/routing rip
set distribute-default=never garbage-timer=2m metric-bgp=1 metric-connected=1 \
    metric-default=1 metric-ospf=1 metric-static=1 redistribute-bgp=no \
    redistribute-connected=no redistribute-ospf=no redistribute-static=no \
    routing-table=main timeout-timer=3m update-timer=30s
/snmp
set contact="" enabled=no engine-id="" location="" trap-community=public \
    trap-generators=temp-exception trap-target="" trap-version=1
/system clock
set time-zone-autodetect=yes time-zone-name=Africa/Johannesburg
/system clock manual
set dst-delta=+00:00 dst-end="jan/01/1970 00:00:00" dst-start=\
    "jan/01/1970 00:00:00" time-zone=+00:00
/system identity
set name=MikroTik
/system leds settings
set all-leds-off=never
/system logging
set 0 action=memory disabled=no prefix="" topics=info
set 1 action=memory disabled=no prefix="" topics=error
set 2 action=memory disabled=no prefix="" topics=warning
set 3 action=echo disabled=no prefix="" topics=critical
/system note
set note="" show-at-login=yes
/system ntp client
set enabled=no primary-ntp=0.0.0.0 secondary-ntp=0.0.0.0 server-dns-names=""
/system resource irq
set 0 cpu=auto
set 1 cpu=auto
set 2 cpu=auto
/system routerboard settings
set auto-upgrade=no boot-device=nand-if-fail-then-ethernet boot-protocol=\
    bootp force-backup-booter=no protected-routerboot=disabled \
    reformat-hold-button=20s reformat-hold-button-max=10m silent-boot=no
/system routerboard mode-button
set enabled=no on-event=""
/system upgrade mirror
set check-interval=1d enabled=no primary-server=0.0.0.0 secondary-server=\
    0.0.0.0 user=""
/system watchdog
set auto-send-supout=no automatic-supout=yes no-ping-delay=5m ping-timeout=1m \
    watch-address=none watchdog-timer=yes
/tool bandwidth-server
set allocate-udp-ports-from=2000 authenticate=yes enabled=yes max-sessions=\
    100
/tool e-mail
set address=0.0.0.0 from=<> port=25 start-tls=no user=""
/tool graphing
set page-refresh=300 store-every=5min
/tool mac-server
set allowed-interface-list=all
/tool mac-server mac-winbox
set allowed-interface-list=all
/tool mac-server ping
set enabled=yes
/tool romon
set enabled=no id=00:00:00:00:00:00
/tool romon port
set [ find default=yes ] cost=100 disabled=no forbid=no interface=all
/tool sms
set allowed-number="" auto-erase=no channel=0 port=none receive-enabled=no
/tool sniffer
set file-limit=1000KiB file-name="" filter-cpu="" filter-direction=any \
    filter-interface="" filter-ip-address="" filter-ip-protocol="" \
    filter-ipv6-address="" filter-mac-address="" filter-mac-protocol="" \
    filter-operator-between-entries=or filter-port="" filter-stream=no \
    memory-limit=100KiB memory-scroll=yes only-headers=no streaming-enabled=\
    no streaming-server=0.0.0.0
/tool traffic-generator
set latency-distribution-max=100us measure-out-of-order=yes \
    stats-samples-to-keep=100 test-id=0
/user aaa
set accounting=yes default-group=read exclude-groups="" interim-update=0s \
    use-radius=no
 
kolbep
just joined
Topic Author
Posts: 19
Joined: Sat Jun 17, 2017 2:14 am

Re: Fresh Config on 6.45.3 - Hotspot Not Working

Wed Aug 28, 2019 10:38 pm

Looks like Hotspot on 6.45.3 Stable is broken (for the Redirect to Login Page,etc).
Had to go down to the previous Long Term Version, and Bingo, hotspot works fine now.
 
jober
Long time Member
Long time Member
Posts: 690
Joined: Fri May 28, 2004 12:16 pm
Location: Louisiana,USA

Re: Fresh Config on 6.45.3 - Hotspot Not Working

Mon Nov 18, 2019 12:06 am

Did they fix your issue? Or are you stuck on the older version?
 
pantufa
just joined
Posts: 1
Joined: Thu Nov 21, 2019 4:25 pm

Re: Fresh Config on 6.45.3 - Hotspot Not Working

Thu Nov 21, 2019 4:28 pm

Thanks kolbep, i had a same problem and the solution is downgrade. The news firmware to mk not working on Hotspot.
 
bentogoa
just joined
Posts: 8
Joined: Sat Apr 28, 2018 6:48 pm

Re: Fresh Config on 6.45.3 - Hotspot Not Working

Sun Nov 24, 2019 9:08 am

This Problem is for Hap Lite model only starting from version 6.45.
Moving to long term channel works fine.

Edit: RB750 is affected too.
moving to long term channel for update work here too

Mikrotik Fix this pls
 
ktcomgrup
just joined
Posts: 14
Joined: Sat Nov 07, 2009 9:07 pm

Re: Fresh Config on 6.45.3 - Hotspot Not Working

Sun Jan 19, 2020 12:24 am

Same issue.
6.45.6 not working
6.46.2 not working
6.44.6 long term working
Mikrotik please fix Hotspot!!!

Who is online

Users browsing this forum: Google [Bot], mac86, phascogale and 48 guests