mAP lite on 6.45.5 after reset-configuration allways start with blank configuration.

on 6.44.5 after factory-reset start normally with default config.

The same situation is at the CCR1072
after the system reset-configuration,
device allways bootup with the BLANK config.
By connecting to the device through the MAC in the logs there is only
00:00:22 script, info Starting_defconf_script_
but no default settings are applied.

as far as I can see, the default config on CCR1072 is different from the same default config on rb4011-in
On RB4011-in there are no such problems.

Is it possible to manually run script a default "apply" of the Mikrotik default config?

Thank you for clarifying the issue, we have reproduced it and will fix it as soon as possible.
You can run command /system default-configuration print to see exact applied default configuration commands.

Same here, map lite - the problem with 6.46.4. No default configuration is applied when resetting the configuration. Was no problem on a long-term 6.44.xx.
Really inconvenient because wifi is turned off by default. For my use case, a Map Lite was thought to be a travel router, but it is not possible to connect to it without having a laptop with a LAN cable, which is a no go.
Disappointed, because I noticed this bug at least half a year ago, it has not been solved since then. Moreover, the 6.44.xx version is not supported as of now (replaced with a 6.45.xx long-term)...
Dear developers, if you are reading this forum - please check it out and fix it in the future updates! If the community has found out a workaround - how to make the default config actually work - kindly ask to share.
Thank you.