Community discussions

MikroTik App
  4. RouterOS
  5. General

SmartUPS monitoring not working well

Post Reply
 
Inssomniak
Member
Member
Topic Author
Posts: 332
Joined: Fri Apr 13, 2007 11:21 pm

SmartUPS monitoring not working well

Fri Apr 13, 2007 11:25 pm

I bought a SmartUPS 1400 model built in 2001.

I configured it with routerOS (x86), and it picked it up, it works, but only for a short time, ~10 minutes then routerOS loses connection to it, it turns the UPS to Invalid, and it never re-establishes connection? I can no longer monitor/beep it

Anyone have any ideas? I bought specifically the SmartUPS because it was well-supported by Mikrotik
Top
 
User avatar
DuDuS
newbie
Posts: 30
Joined: Sat May 29, 2004 1:06 pm
Location: POLAND
Contact:
Contact DuDuS

I have this problem too

Fri Apr 27, 2007 7:24 pm

Hi.

I have exacly disame problem. Not solved yet.

MT team help!

Best regards
Top
 
odie
Member Candidate
Member Candidate
Posts: 216
Joined: Wed Mar 23, 2005 8:31 am
Location: Austria
Contact:
Contact odie

Fri Apr 27, 2007 8:07 pm

you need to specify serial port speed to 2400 and then it should work
Top
 
Inssomniak
Member
Member
Topic Author
Posts: 332
Joined: Fri Apr 13, 2007 11:21 pm

Sat Apr 28, 2007 12:56 am

This did not help, the UPS went invalid with port speed 2400, (flow control was xon/xoff) not sure if this matters or should be none?/hardware?
Top
 
User avatar
DuDuS
newbie
Posts: 30
Joined: Sat May 29, 2004 1:06 pm
Location: POLAND
Contact:
Contact DuDuS

working

Sat Apr 28, 2007 10:53 am

Hi.

Now it is working well (about 14h).
Flow control=hardware

Thanks a lot!

Best regards
Top
Post Reply

Who is online

Users browsing this forum: No registered users and 124 guests
  4. RouterOS
  5. General