Community discussions

Member Candidate
Member Candidate
Topic Author
Posts: 116
Joined: Sun Nov 02, 2008 5:51 pm

Quee Process High

Sat Aug 31, 2019 10:47 am

Hi Dear Friend I used Simple queue For limit 2G BW on 1072 Router Cpu is High
Now suggest to me limt BW By quee tree ( mikroitk suggest used Queee Tree mark Packet )

Now do this

chain=prerouting action=mark-packet new-packet-mark=Nakhl-IN passthrough=yes dst-address-list=nakhl-IPS in-interface=Internet-INPUT-VLAN log=no log-prefix=""

And limit RX packet by

name="Nakhl-IN" parent=global packet-mark=Nakhl-IN limit-at=0 queue=default-small priority=8 max-limit=2000M burst-limit=0 burst-threshold=0 burst-time=0s bucket-size=0.1
This Configuration True ????

How second Question How llimit TX Rate ???

Another Question Avg Rate in queue Tree Packet Avge Rate or BW avg rate????
User avatar
Forum Guru
Forum Guru
Posts: 1795
Joined: Tue Oct 12, 2010 3:23 am
Location: Antwerp, BE

Re: Quee Process High

Sat Aug 31, 2019 11:48 pm


Do you have another system to test these changes?

In this particular case I would take that "advise" with a HUGE grain of salt, or better yet: just ignore it...

Simple queues are processed by multiple cpu cores, which spreads the load. Do you see that? Try monitoring with /tool profile
On the other hand for a queue tree, linked to a particular interface, only 1 cpu will be used. Given your bandwidth of 2gb, i'm pretty sure that a single cpu will NOT be able to process that queue fast enough. You'll introduce a bottleneck.

Verify these remarks in your situation, to be sure.

But high(er) load is the price to pay for queueing high bandwidth.

Who is online

Users browsing this forum: MSN [Bot] and 82 guests