OS Ver: 6.45
Bridge Interface BR1_UPLINK
Attached interfaces to bridge: wlan 1 ( vlan 50 tag ) wlan2 ( vlan 20 tag ) ether 2 ( trunk ) ether 3,4,5 ( connected laptop )
Issue: How to mark interfaces 3,4,5 with access vlan 50 so it will pass to ether 2 down stream to ubnt switch trunk port ?
Tried: Switch1 unit set mode secure VLAN always strip on port 3,4,5.
P.S. Wireless links works fine, because tagged with proper vlans on ssid level.
Any help thank you.