Hi, in trying to setup a better WAN failover using this guide:
https://wiki.mikrotik.com/wiki/Advanced ... _Scripting
Just the basic setup, so far so good, i have that set up, using 184.108.40.206 and 220.127.116.11 as hosts i also have a DHCP lease script running to update the gateways on the first part as i have two cablemodem conections with dynamic ips.
Using mangle i was able to set a specific IP to use "ISP1" and "ISP2" routing mark, this works so, so far this is set up correctly, BUT if i remove the default routes created by DHCP clients on both wan0 and wan1, there is not internet, this is not a suprise as i know that if a use /ip filter to add a routing mark on the default routes, they are not used, so i expected this to fail.
So this is the thing, if i only have routes with marks, this case "ISP1" and "ISP2", how i make it work? What im missing here?