Community discussions

MikroTik App
 
flameproof
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 80
Joined: Tue Sep 01, 2015 3:17 pm

Graphing in WebFig not able to measure above 2Gbps

Wed Oct 30, 2019 6:39 pm

Hi all,

Having a weird problem, this is a CCR1072 running 6.44.3. Under Tools -> Graphing, our upstream interface graph shows this:
Screen Shot 2019-10-30 at 17.33.51.png
However, we are pushing closer to 4Gbps at peak times, which reflects in the HTML-based graph view:
Screen Shot 2019-10-30 at 17.34.04.png
Anyone have an idea why this is? I gave our service provider a riot act reading for capping us, then realized it was our monitoring that was failing.
You do not have the required permissions to view the files attached to this post.
 
mducharme
Trainer
Trainer
Posts: 985
Joined: Tue Jul 19, 2016 6:45 pm

Re: Graphing in WebFig not able to measure above 2Gbps

Wed Oct 30, 2019 6:58 pm

It is probably storing the rate as a long (signed 32-bit) integer, which can only exist within the range [−2,147,483,647, +2,147,483,647]
 
flameproof
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 80
Joined: Tue Sep 01, 2015 3:17 pm

Re: Graphing in WebFig not able to measure above 2Gbps

Wed Oct 30, 2019 6:59 pm

Good catch! Is it a bug then? :-)
 
mducharme
Trainer
Trainer
Posts: 985
Joined: Tue Jul 19, 2016 6:45 pm

Re: Graphing in WebFig not able to measure above 2Gbps

Wed Oct 30, 2019 7:05 pm

Good catch! Is it a bug then? :-)
I would say so, yes. Once your rate exceeds 2,147,483,647bps it seems to be doing a wraparound with -2.1Gbps as the starting point. It is a similar problem to SNMPv1 counter overflow. You can see the strange zig-zag pattern once you hit 2.1Gbps, the low "zags" every other datapoint are actually showing you the rate above 2.1Gbps (2.1Gbps becomes zero in those moments). So around the end of your graph where you see the low "zags" reach about "1.3Gbps" or so, that is actually 1.3Gbps above 2.1Gbps so your actual rate there would have been about 3.4Gbps.
 
flameproof
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 80
Joined: Tue Sep 01, 2015 3:17 pm

Re: Graphing in WebFig not able to measure above 2Gbps

Thu Oct 31, 2019 9:11 am

Do I need to file it as a bug anywhere then? Or it gets taken from here directly?
 
Kevo
Frequent Visitor
Frequent Visitor
Posts: 59
Joined: Wed Oct 12, 2011 1:38 am

Re: Graphing in WebFig not able to measure above 2Gbps

Thu Oct 31, 2019 4:16 pm

Send an email to support@mikrotik.com.

I've never even looked there for graphs before. I watch the realtime graph in the interface sometimes and I look at the graphs webpage and both of those don't seem to have any issue.

Who is online

Users browsing this forum: Bing [Bot], enum22, heidarren and 68 guests