Community discussions

 
menk0
just joined
Topic Author
Posts: 4
Joined: Thu May 03, 2007 2:32 am

best way to separate lan/net

Thu May 03, 2007 2:45 am

Can someone say the best way to separate lan/net. I meen that user can have in wlan 512/512, but on the net to go with 128/128 example. What is the best way to realise that without difrent subnets.

Just few words.

Regards
 
menk0
just joined
Topic Author
Posts: 4
Joined: Thu May 03, 2007 2:32 am

Thu May 03, 2007 2:04 pm

So can someone say one good way to explaine this problem. I have read mikrotik tutorial but i didn't find solution to resolve this problem.
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6283
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Thu May 03, 2007 3:08 pm

you can do that,

make diferent packet markings depending on destination and source - if destination is local, then mark as local, and for net address.

then set up limitation that user cannot send more than upper limit you want it to have.

hope you understood me. :roll:
 
menk0
just joined
Topic Author
Posts: 4
Joined: Thu May 03, 2007 2:32 am

Thu May 03, 2007 7:08 pm

Heh i get it but try to explaine better. So i will use mangle and queue tree and simple queues?
 
menk0
just joined
Topic Author
Posts: 4
Joined: Thu May 03, 2007 2:32 am

Sun May 06, 2007 6:45 pm

Can anyone say few words to resolve this problem. Thx anyway
 
titius
Member
Member
Posts: 338
Joined: Mon Oct 17, 2005 11:43 am
Location: Titel Serbia

Tue May 08, 2007 1:29 am

yes you will use : AddressList, Simple QUEUE, Mangle

mark all packets that are going to !addresslist; SRC=addresslist dst=!addresslist mark packet=blah

mark inbound packet dst=addresslist src=!addresslist mark Packet=blahin

queue limit=128k packet_mark=blahin download from internet

queue limit=64k packet_mark=blah upload to internet

Who is online

Users browsing this forum: MSN [Bot] and 106 guests