I'm at the limit of my knowledge here. I've successfully done a 2 LAN over 2 WAN setup in the past but I'm struggling to get 6 LAN over 3 WAN working. The goal setup goes like this:
LAN 1, LAN 2, LAN 3 -> WAN 1
LAN 4, LAN 5 -> WAN 2
LAN 6 -> WAN 3
WAN 1 is a static IP - Working.
WAN 2 and 3 are running on PPPoE clients and both are working.
All Vlans are setup with tags, gateway, dhcp etc and are tested working if I tag WiFi networks and switch ports further into the network (Unifi equipment)
All WAN's have masquerade rule set.
I've tried to follow the mikrotik wiki and various forum posts using mangle rules and adding marks to routes with no success. It's possible that traffic may have been leaving through the correct WAN but I kept getting the same public IP on any devices I tested.
I don't have a config to export unfortunately as after wasting nearly a day on it I rage quit and wiped the router -_-
Any help with this would be awesome. Thanks!