Community discussions

 
MMorris
newbie
Topic Author
Posts: 40
Joined: Sun May 06, 2007 7:42 pm

Wireless With low bandwith

Sun May 06, 2007 7:49 pm

I have a 10 mile link and can only get 4.2 mbps Rx and 4.2 mbps Tx. i have tryed 5 GHZ turbo and nothing has changed.

dose anyone have any sugestions?
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6283
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Mon May 07, 2007 10:01 am

there are many threads in this forum that would be helpful for you,

to list some: low signal level, high noise, bad cabling, bad antenna, broken wireless card etc.
 
arions
just joined
Posts: 4
Joined: Sat Jun 02, 2007 3:14 pm

Re: Wireless With low bandwith

Sat Jun 02, 2007 3:51 pm

what kind of hardware do you use ?
 
MMorris
newbie
Topic Author
Posts: 40
Joined: Sun May 06, 2007 7:42 pm

Re: Wireless With low bandwith

Wed Jun 27, 2007 11:29 pm

I am using routerboard 500 with cm9 cards.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24267
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Wireless With low bandwith

Thu Jun 28, 2007 9:22 am

check cables and connectors
make sure cable is not longer than 2-3 meters
check antenna polarization and align it properly
make sure there is clear line of sight (visibility)
change frequencies / check for interference
check pigtails, are they are attached to correct connectors
check if height of the endpoints is enough

also how did you test it?
 
MMorris
newbie
Topic Author
Posts: 40
Joined: Sun May 06, 2007 7:42 pm

Re: Wireless With low bandwith

Sat Aug 25, 2007 4:28 am

I am able to get 20 mbps with OSPF routing full duplex wireless! now my issue is the processor is at 100% so i think that is my limitation at this point.
 
uldis
MikroTik Support
MikroTik Support
Posts: 3425
Joined: Mon May 31, 2004 2:55 pm

Re: Wireless With low bandwith

Mon Aug 27, 2007 9:21 am

I am able to get 20 mbps with OSPF routing full duplex wireless! now my issue is the processor is at 100% so i think that is my limitation at this point.
how fast are you routers, are they Routerboards? You can also make the support output file and send it to support@mikotik.com to check if that 100% is due to the limitation of the CPU or maybe there ia some other problem (maybe a bug).
 
MMorris
newbie
Topic Author
Posts: 40
Joined: Sun May 06, 2007 7:42 pm

Re: Wireless With low bandwith

Tue Aug 28, 2007 12:24 am

I am using Routerboard 532 and i have never done a support output before. how do i do that and is it free to send it to mikrotik?
 
uldis
MikroTik Support
MikroTik Support
Posts: 3425
Joined: Mon May 31, 2004 2:55 pm

Re: Wireless With low bandwith

Tue Aug 28, 2007 9:33 am

I am using Routerboard 532 and i have never done a support output before. how do i do that and is it free to send it to mikrotik?
Here are the instructions:
http://www.mikrotik.com/testdocs/ros/2. ... upport.php
 
MMorris
newbie
Topic Author
Posts: 40
Joined: Sun May 06, 2007 7:42 pm

Re: Wireless With low bandwith

Tue Aug 28, 2007 10:42 pm

Thanks I will have to try that!

Who is online

Users browsing this forum: No registered users and 148 guests