I've got a curios issue. When interfaces and corresponding routes are placed in a VRF, users can't browse at all. They can ping, traceroute, resolve names etc, but browsing does not work at all. The moment I move all the interfaces and routes back to the main routing table, everything works fine. I'm at a loss as I've configured VRF's a thousand times before and never ran into this issue.
RB2011 running 6.46.1
add distance=1 gateway=100.64.18.106 routing-mark=CLIENT-CORP
/ip route vrf
add interfaces=vlan10-corp-internet-outside,vlan100-corp-lan route-distinguisher=2:2 routing-mark=CLIENT-CORP
/ip firewall nat
add action=src-nat chain=srcnat out-interface=vlan10-corp-internet-outside src-address=10.98.100.0/24 to-addresses=public.ip.comes.here
Any guidance would be greatly appreciated.