Hello,
we have 2x 2x1Ge bondings with 802.3ad. When we add them to same bridge there is packet loss.
In combination when one is 802.3ad and other active/backup there is no packet loss.
We are using 6.46.1, same issue was present on 6.45.X.
If i understood correctly the OP says that there are 2 Bondings inside the same Bridge. If those 2 Bondings inside the same Bridge are 802.3ad there is packet loss, when different there is no packet loss.. so why should the Layer1 connectivity be the problem ?What type of links are you connecting to the ports in the bridge? copper/fiber/RF?
If i understood correctly the OP says that there are 2 Bondings inside the same Bridge. If those 2 Bondings inside the same Bridge are 802.3ad there is packet loss, when different there is no packet loss.. so why should the Layer1 connectivity be the problem ?What type of links are you connecting to the ports in the bridge? copper/fiber/RF?
although the OP talks about 2 different bondings...bonding in the channel to flap
Thanks Zacharias.Layer 2 and 3 should be used with 802.3ad and not Layer 3 and 4...
https://wiki.mikrotik.com/wiki/Manual:I ... ng#802.3ad
Also, did you check the CPU usage when you use 2 802.3ad inside the Bridge ?