Hi everyone, I've been struggling with this issue for a while, but I can't find a solution, I'd like to see if you can give me a hand.
I am working with a mikrotik RB951, it has all 5 ports occupied.
I have 3 devices in ports 1, 2 and 3.
And 2 wan on ports 4 and 5.
The first WAN is a fiber line with PPTP.
this connection is symmetrical, it's 300mb down and up. on the way down I'm fine, but on the way up I only have 200mb. with my direct provider's modem, I have the correct speed.
And with the secondary WAN I have 1GB of download and 30 MB of upload, in this case the upload is ok, but the download didn't reach 350mb and it's something that is driving me crazy.
This last connection the ip is obtained by DHCP and then my devices take DHCP from the armed bridge in the mikrotik, the truth is that it is not an extensive NETWORK, in the firewall I only have the fasttrack and a DNS drop rule to avoid attacks to that port.
My RB951 should be able to traffic the 1GB connection without any problem? I'm testing it from Speedtest, because with the live modems from my 2 providers they set the contracted speed.
I'm assuming that my router doesn't have the capacity to traffic that value
Thanks for your valuable help.