Community discussions

MUM Europe 2020
 
saeed6668
just joined
Topic Author
Posts: 1
Joined: Fri Feb 14, 2020 1:26 pm

Mikrotik Dual wan without loadbalancing and pppoe

Fri Feb 14, 2020 1:47 pm

Hi. I got a question and appreciate if you would help me. I have a routerboard with 2 WAN and 1 LAN

Port 1 : 192.168.100.1/24 as LAN
Port 2 : 192.168.10.2/24 WAN 1
Port 3 : 192.168.1.2/24 WAN 2
WAN 1 is only for specific websites which are mentioned in /ip firewall address list "A" for example and wan2 is for surfing internet and other websites than "A". I have DHCP on Lan and users can open "A" address list without any connection. I have a prerouting in mangle source 192.168.100.0/24 mark routing name through wan1 passthrough=no. and also in ip routes i have added a static route 0.0.0.0/0 with gateway 192.168.10.1 and routing mark = through wan1. Up to now every thing is fine. Now i have activated radius pppoe for lan so users must connect pppoe connection to surf the net and any website other than "A" with wan2 the same time having access to wan 1 . The users connect but after that i have ping to 8.8.8.8. But the wan1 connection disconnects. When i disconnect pppoe connection, ping to wan1 comes back but no internet and when i coonect pppoe internet is ok but wan1 is out. What have i missed??

Who is online

Users browsing this forum: CZFan, ingdaka, McSee and 123 guests