calea

jp · Fri May 18, 2007 4:47 pm

I was reading on the wiki about calea here: http://wiki.mikrotik.com/wiki/Calea

Is the calea package available at this time?

I was going to spend today finishing up my calea server on SuSE linux. But if MT is almost ready with something, I will go about other things and not duplicate anyone's good work! Thanks!

janisk · Fri May 18, 2007 5:33 pm

there will be a lot of information about CALEA and some demonstrations about CALEA at MUM in Orlando

Mon May 21, 2007 8:59 am

it will be in next RouterOS beta version ( 8 )

jp · Mon May 21, 2007 4:55 pm

Excellent; Thanks!

nickb · Tue May 22, 2007 7:40 am

Is there any hope of seeing this in 2.9.x?

Tue May 22, 2007 9:36 am

we will add it

jparsons · Tue May 22, 2007 10:53 pm

You guys are the greatest!

will there be some examples possibly?

For example... if issued with a subpoena, this is a possible senario of how to comply...

I cannot make it to MUM unfortunately, but want to... just not possible right now.

Thanks!

natedogg104 · Thu May 24, 2007 4:51 am

i made a calea box with passive transfer from a ghetto tap that goes into a bsd box. The data is queried from my radius and sql server , and the packet sniffer written in perl translates into the tia standard. Im wondering if the mikrotik will comply with the standard of encapsulating the packets to the leas, or if it will be a glorified packet sniffer only and we will still need to transfer the packets with a mediation device.

Thu May 24, 2007 9:00 am

i made a calea box with passive transfer from a ghetto tap that goes into a bsd box. The data is queried from my radius and sql server , and the packet sniffer written in perl translates into the tia standard. Im wondering if the mikrotik will comply with the standard of encapsulating the packets to the leas, or if it will be a glorified packet sniffer only and we will still need to transfer the packets with a mediation device.

http://wiki.mikrotik.com/wiki/Calea

jparsons · Thu May 24, 2007 3:46 pm

Looks good so far, It would still be nice to see a setup example, configurations, steps required to setup a stream from the client to the server, and the steps required for the LEA to access the data. Can something like this be placed on the wiki itself?

I recieved the email about the CALEA training at MUM in Orlando, however I cannot make it on those dates. I wonder if it would be possible for someone to film the demostration or take enough notes to explain to those of us unable to attend.

Thanks again for implementing this!

natedogg104 · Sun May 27, 2007 10:27 pm

Kewl it must have been updated since i saw it last. Glad to see mikrotik getting in the game on this one. Any release date set for the new beta that includes this yet?

jp · Tue May 29, 2007 9:31 pm

I see the calea package is part of the 3.0b8 download. I have installed it but it doesn't seem to do anything or have any traces in the config besides it's enabled presence in "/system package." The wiki references things that don't work so far.

natedogg104 · Tue May 29, 2007 10:16 pm

I also would love to attend the mum but atm cant get ther with a hectic scheduale. I have about 20-30 rb500 and 20 or so rb112s in the field atm and would love to see some examples of the calea package in action. I have built a passive ethernet tap for the time being , that was wrote to fit the calea standard , but hell why use more servers than needed. The device i have atm stores data in pcap to local and remote ftp servers , opens multiple streams to leas via the standard and just working on the timestamping with md5 hash atm. I hope we get some good examples up so we can use the mikrotik to assist in being safe harbor / calea compliant.
If anyone has any examples or has suggestions feel free to contact me

Nathan Vosburg
http://www.coalinganowire.com
support@coalinganowire.com

Hammy · Tue May 29, 2007 11:23 pm

I am registered for the MUM, but will be unable to make it due to my schedule.

I see that the next versions of 2.9 and 3.0 were supposed to support it, but there is no mention in the changelog for 3.0b8 with regards to CALEA. When will the next 2.9 be ready?

Wed May 30, 2007 12:41 am

it is in beta8 although changelog doesn't mention it. look in the wiki to learn how to configure it

Letni · Wed May 30, 2007 3:02 am

Can someone else confirm that it is in 3.0beta8.
I am unable to find it in the /tool list as the wiki suggests.
I also checked for a new version of winbox thinking it needed to be updated, but no such luck.

-Louis

GotNet · Wed May 30, 2007 4:29 am

Can someone else confirm that it is in 3.0beta8.
I am unable to find it in the /tool list as the wiki suggests.
I also checked for a new version of winbox thinking it needed to be updated, but no such luck.

-Louis

It is installed (default disabled). Must use CLI.

natedogg104 · Wed May 30, 2007 8:12 pm

i can confirm it is in the beta, with the things that it mentions int he wiki just gona have to do some tweaking to get it to work in the fashion that you want it for your specific network, but i can confirm its all ther

natedogg104 · Thu May 31, 2007 1:29 am

OK i see data passing thru the filter but wher oh wher does it store this data , i dont see it on the retention server anywher

csickles · Tue Jun 05, 2007 7:39 pm

See the WIKI docs...
Also look at the MUM presentations from Orlando.
Look for the presentation on CALEA from Butch Evans.
About 3/4 thru the document you will see a sample config for both the "TAP" and the "Storage Server" configs..

PLEASE remember this is a early release.
The data is currently being stored on the "system drive" so X86 systems would be recomended for the storage server at the moment..

I am logging thei visit to the forums to a P4 system as I type...

VERY EASY config at both ends.....

You can watch the data "pile up" at the storage server (MikroTik RouterOS box configured as a CALEA storage server device) as the link is used..

Another GREAT TOOL !!!

Thx boys !!!

Craig

changeip · Tue Jun 05, 2007 9:54 pm

i have a feeling it's 3.0 only. . . they are at the point it doesn't make sense to add something that large to an almost stable system. another way to get more people using 3.0 so we can make it stable enough for production

Sam

csickles · Tue Jun 05, 2007 10:12 pm

I have been told that it will be added to 2.9.4(4).. that may bee why it seems a bit delayed...

Craig

natedogg104 · Sat Jun 09, 2007 7:37 pm

See the WIKI docs...
Also look at the MUM presentations from Orlando.
Look for the presentation on CALEA from Butch Evans.
About 3/4 thru the document you will see a sample config for both the "TAP" and the "Storage Server" configs..

PLEASE remember this is a early release.
The data is currently being stored on the "system drive" so X86 systems would be recomended for the storage server at the moment..

I am logging thei visit to the forums to a P4 system as I type...

VERY EASY config at both ends.....

You can watch the data "pile up" at the storage server (MikroTik RouterOS box configured as a CALEA storage server device) as the link is used..

Another GREAT TOOL !!!

Thx boys !!!

Craig

OK well thats dandy where will i find the mum presentation doctuments been all over the site and cant seem to locate them, as i am unable to attend the MUMS at the moment due to the time frame. Thanks for the info though...]

ok slash that i found the info , ty so much for the push in the right direction

Mon Jun 11, 2007 9:05 am

http://wiki.mikrotik.com/wiki/MUM_2007_US

Hammy · Fri Jun 22, 2007 4:04 am

I think they've repeatedly said it will be in 2.9.44. That said, I too want to know when 2.9.44 will be available.

calea

calea

calea

Re: calea

Re: calea

Re: calea

Re: calea

Re: calea

Re: calea

Re: calea

Re: calea

Re: calea

Re: calea

Re: calea

Re: calea

Re: calea

Re: calea

Re: calea

Re: calea

Who is online